You know how the phase 2 armrest always ends up cracking the center console? I got a good non-cracked console and decided to prevent it from ever breaking:

Awesome, now if only there was a way to prevent the vinyl from pulling up off that nasty foam on the armrest.

Wraith . wrote:Awesome, now if only there was a way to prevent the vinyl from pulling up off that nasty foam on the armrest.

I fixed that also.. Goop automotive glue does the trick

didn't work for us.. Maybe its just too damn hot here... Actually, it worked for like a month before it seperated again. I'm going to build a center console and take care of it all in one fell swoop

pezed wrote:

Wraith . wrote:Awesome, now if only there was a way to prevent the vinyl from pulling up off that nasty foam on the armrest.

I fixed that also.. Goop automotive glue does the trick

I've never seen the console cracked before but I've seen the foam thing messed up, happen on my sisters car

I just ripped all mine off.

too late for me




---------------------------------------------------------------
Proud owner of a beaten up 93 Chevrolet Sunvalier 4dr

I Saw the Thread that Never Ends start in v6, and lived to tell it

i took the foam and plastic piece out put in a piece of 2x4 and re attached the vinel. a little hard but it holds up

Quote:

Awesome, now if only there was a way to prevent the vinyl from pulling up off that nasty foam on the armrest.

Superglue. Clean the vinyl and the plastic with a strong alcohol first, then glue a little bit of the armrest at a time. I've done it to several cars with good results.

-->Slow

i tried the lazy fix for this at one point. let me tell ya', no console makes the interior look uber trashy!
back in went the cracked piece. no biggy.




Have you seen the turbo wagon?

14.069 @ 98.91mph
229.1hp & 261.7ft/lbs @ 6psi
no tuning time