I need to know where i can find cheap bodykits
I need to know where to get engine parts for my 3.1L
Taillights, clear corners, fenders, hoods, Aluminum Spoilers, metal floor mats, racing seats, pillars and gauges

look in the sticky's posted at the top of the page.

Body kits

www.razzi.com
www.dizaracing.com
www.ondergound-design.com

Taillights are a different matter, you need to custom make those or do a swap.

There are not alot of aftermarket engien mods you can straight out buy for your Z. Most is custom as well. YOu can do alot of stuff yourself, there is a how-to section here http://www.v6z24.com/howto/cat/performance

You can find alot of the other stuff at your local auto parts place. Like auto-zone and such.

You can also make clear corners, there is a how-to here
http://www.v6z24.com/howto/cat/appearance

Good luck. I own a 89'Z24 vert myself, they are alot of fun to drive. Good luck.

try fx design


**changes are here**

Wow...... a very simple search would have turned up about 200 posts asking the same thing, and every one of them always points back to the stickys......

I'm sure he'll be hit by a ambush of second gen'ers for this so I'll just pass on thru.



Originality and Creativity surpasses Popularity

search, i thought we had stickies for these things at the top of the second gen forum
newbs

ok thanks but i need to know where to get engine mods for a 3.1



I need to know where i can get a cold air intake for my 1989 Cavalier z24

gah, engine mods can be found at jbody performance and I'll say it one more time for everyone asking this lately. A CAI will have to be custom made for your second gen. any make, any model (to my knowledge)



Originality and Creativity surpasses Popularity

ok..... thanks again



I need to know where i can get a cold air intake for my 1989 Cavalier z24

i need to know where to get the office lighting covers to make clear corners.


I need to know where i can get a cold air intake for my 1989 Cavalier z24

CAI = cold air intake. I'm done.



Originality and Creativity surpasses Popularity

ok garret, for the office lighting, you have to break into a hospital at midnight, and steal all of the flouresant bulb light covers from the roofs of all the rooms, then break them into tiny pieces, melt them down and create a monster out of the remains to go and buy a set from somewhere like say, office depot with counterfiet money that it will already somehow have the knowledge to create on it's own,

and for the cold air intake, well, it would take too long, so instead of being sarcastic i'll say, go to a machine shop with one of the pieces of crap that they make for the hondas, say "i want this to work on my car" and give them a few days, come back, get reemed for the cost of it, and enjoy


"I live my life a quarter mile at a time..." "for those ten seconds or less I'm free"

alright