Well im done w/ the cav and decided it would make a better beater than anything else so i've stripped all the parts and they are now for sale. Here is a list of the items
TRD Kit with VIS CF Splitter: This will not be parted out. Whole kit must sell WITH splitter. The kit is painted black and in great condition, minus the little tweeking needed to get it to fit. Only thing wrong w/ this kit is a little scratch on the passenger side, side skirt (towards the rear wheel) and the fact that there is a a spider web crack in the clear coat of the cf splitter do to some assbag trying to steal it. I will have pics of this later tonight. I also have an 00z rear if you would like that with the kit. Rear bumper is in mint condition.
~~~$650 w/o rear or $700 with rear
18" ADR Cyphers: Rims are in perfect condtion. no scratch or marks on rims. Rims are a dark dark bronze (almost black) with a polished lip. There will be brand new tires on the rims when they sell. Stickers will still be on the tires. Tires will be 225/40/18 Kumho Ecsta 711's. Rims will also come with a set of black Mcgard splinedrive lugs. Lugs sell for 85 bucks.
~~~$1100/obo
ClassGlass CF Extractor Hood: Hood has some damage. A little nic in the corners up at the top by the windshield and there are little holes on the underside of the hood from the easystreet struts. Little smaller than a dime and they are located under the hood right about the strut towers. They show no marks on the outside. Hood does come with hood pins for you to pin the hood. Pics of the damage will follow later tonight.
~~~$275/obo
Fully Shaved Trunk Lid: Trunk lid is painted black but the clear coat is peeling on the lid. I will have pics of this tonight (if you are going to repaint the lid, it doesnt matter anyway, this is just to let anyone that has a black car that is interested in the lid aware of the problem). The lid was WELDED closed. You can see the weld marks for the taillights if you look on the inside of the lid. The lid is fully shaved of tailights and trunk lock. No spoilier or spoiler holes on lid.
~~~$250/obo
Full Easystreet Suspension:
(4) Air struts
(1) 5 gallon tank (tank comes with a pressure gague on tank)
(1) 450cc viair compressor
(8) 3/8" Chrome valves (i have one extra valve that will be thrown in if needed, will explain later about this extra valve)
(1) 145-175psi pressure switch
(1) In-dash relay switch to compressor
(2) Dual needle 200psi mechanic air ride gauges
(1) 200psi rated water trap
(1) Smoke black 10 switch switch box
(1) Triple gauge pod (I have an autometer volt gauge if you would like to buy too, to fill in that extra hole)
Kit comes with 1/2" air lines
I have about 40-45 extra feet of 1/4" line (1/4" lines is the line T'd off the main 1/2" line to run to the back of the gauges)
If interested please pm w/ an offer. Im not going to throw an offer out because im looking for some kind of suspension swap in return (looking for either stock suspension or tokico hp or kyb gr2 struts). Price will depend on what suspension (if any) that you are willing to trade. This kit is in great condition still. I never played with the bags in traffic or abused this kit in any way. I got it for when i had my drift kit and it was too low for my streets. The car is barely driven as i drive my beater most the time. Never had any problems with kit other than regular maintance of the kit such as tightenin some things and replacing a fitting here or there. The car rides great. The struts have 9 way damping. Just set the car to the height you want and adjust the damping.
Beat, Battered & Abused Drift Kit: Well the title says it all. the kit has several big cracks and broken side skirts. If you want to reglass it or make it into a project then this is something for you. Other than that, this kit will not be used for anything else. It needs ALOT of work and i just want to move this kit out my house.
~~~$100/obo
Everything else in my reg will be listed in the classifieds minus the headunit and amp (thank you mister theif). Im located about 20 mins south of philly. Everything listed above will be for pick up only.
ENGINE FOR SALE??? COMEON ??
That hood has been on the hottest car on the org and then yours so it should go to a good home. LOL
If I was keeping the car I would put it back cause I really really like that hood alot. You should have no problem selling that hood.
This is like the second CF X2 hood Class Glass made. Or it could be the first but I think the kid with the red sedan with import fighter kit got that. Forgot his name. Very lite but strong hood.
What about wheels w/o tires before you get new rubber put on them? I hate Kuhmo tires, i've had nothing but bad luck with them.
Edited 1 time(s). Last edited Tuesday, November 14, 2006 2:43 PM
How about 800 for the air ride, and stock suspension? PM me then even if you dont like the offer, we can talk.
David Alameda (Zspeedcav) wrote:That hood has been on the hottest car on the org and then yours so it should go to a good home. LOL
If I was keeping the car I would put it back cause I really really like that hood alot. You should have no problem selling that hood.
This is like the second CF X2 hood Class Glass made. Or it could be the first but I think the kid with the red sedan with import fighter kit got that. Forgot his name. Very lite but strong hood.
yea its a great hood and its still in great shape, minus the marks the easystreet struts made. little dirty, needs to be cleaned but thats all.
Nity9CavSedanCRJ wrote:What about wheels w/o tires before you get new rubber put on them? I hate Kuhmo tires, i've had nothing but bad luck with them.
ill see but id prefer to sell them w/ the tires
Scotty B wrote:How about 800 for the air ride, and stock suspension? PM me then even if you dont like the offer, we can talk.
ill shoot you a pm in the morning
well find out the shipping on the kit to 15045 because this sunday i am going to order it
might as well just order it then. i dont have a box big enough to ship a whole kit plus the shipping on a kit would be expensive do to the size of the box. it would probably have to be freight shipped.
Shipping on that kit would be atleast 300 bucks.. I work at UPS
alright then i guess no one wants anything
Any other pics of the hood?
theres a few more on my cardomain page plus ill have pics of the little damage tonight. i have them but not uploaded yet
yea all hoods from 95-02 are the same. only thing that changed was the bumpers due to the headlights.
I would take the wheels, but i don't want that rubber on them.
Question about the drift kit...does it come with a rear? I am just starting out with this and might make a good project.
I'm about 5 hours away...but road trips are always fun
_____________________________________________________________________________________
I just saved a bunch of money on my car insurance by fleeing the scene of an accident!
i have the full kit, front back and sides but its in pretty bad condition. unless you are really good at glassing then i dont think its really a good project for anyone (im not trying to say you cant fiberglass, just giving a heads up). The kit will probably have to have all the broken areas cut out and new glass laid. I did quick patch jobs on it while it was on the car but never really finished it because i knew i was getting a new kit so to spend hours and hours on it was pointless for me.
so why isnt this post deleted?
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
hoods, wheels, body kits are to large for regular practical shipping... hoods cost about 300 to ship UPS, wheels... eh I can ship wheels for about 200 ish, body kits... just give me your pay checks.. UPS STORE FTW
interested in the beat up drift kit.
Hood is sold
Everything else is still up for grabs. pm me any reasonable offer on any other items
sorry i dunno i really want the air but cant seem to afford it right now.. i dont kno waht to offer either.
