Well I am looking to have a motor built pretty soon and I don't really know anywhere thats very reputable to do it. I was reffered to a place in Lancaster called Race Crafters and they quoted me $2300 just to put the motor together (not inluding parts)
If anyone knows of anywhere within an hr or 2 drive of said area please let me know, thanks!
LE61T PTE6262 Powered 
Let me talk to my buddy John and i'll back to you. He know a couple good ones.
Have a good one,
Justin
I would say Leedy Automotive here in york. If you go about 5 minutes past the sheetz we stopped at on saturday night its on the left. They told me like 1000 dollars labor (not including parts) on my build but that was me bringing them my motor. They said they would assemble it and i would swap it back in. But that price is about right if they have to pull your motor and re-install it. If you would need a garage to pull it in and store your car until its done we got room for 7, lol.
2007 GM Tuner Bash...HELL YEA
PA,MD,NJ,DE,NY and all states north caravan
Boardorgohome wrote:I would say Leedy Automotive here in york. If you go about 5 minutes past the sheetz we stopped at on saturday night its on the left. They told me like 1000 dollars labor (not including parts) on my build but that was me bringing them my motor. They said they would assemble it and i would swap it back in. But that price is about right if they have to pull your motor and re-install it. If you would need a garage to pull it in and store your car until its done we got room for 7, lol.
My plan was to purchase a motor from a junkyard ( a good running low mileage motor) They can be found for ike 400 bucks with less then 15k on em and have that one built, I would basically have the motor shipped to the shop and I would drop off all the parts. I would like a mild port and polish and a 3 angle valve job, I would have full ferrea valvetrain and SS valves, wiseco pistons 8:9.1 CR and Eagle rods with arp head studs and rod bolts and an mls gasket.. along with comp cams turbo cams. thats my build..
but yeah we could do the swap at your garage if you wouldnt mind bro.
LE61T PTE6262 Powered
an eco duh^
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
Leedy Automotive?
Do they do tranny or machine work?
And where abouts is this place exactly?
'Behind Sheetz" could mean a lot of things.
-M
Remember....syringes go in the RED waste basket.
Rodimus Prime wrote:an eco duh^
he said junkyard motor...tell me where u can find a junk eco
Phil, there is a machine shop by my house which is less than 2 hours from you. They are a pretty good place and will be building my new sunbird bottom end for me and doing some pretty extensive crank work. If you want to cut down on costs, just have the shop build the bottom end for you. I can do all of the head work but the valve job for you and assembly the motor if you'd like. We'll talk about it when you come for a hood.
Cardomain|
Myspace
