Hook a brother up, the buddy club rear is way to low and has been ripped off for the 2nd time in a month by unforgiving dips in the road.
I'd even consider stock rear with a lip or something.
Also selling or trading my BC rear, has a crack on the driver side bolt hole about 4-5 inches long, hole is still intact.
]
I have a drift rear I'll let go REALLY cheap...just needs minor fiberglass work (a few stress cracks in the surface). Also have what was an Evo5 rear, I cut out the bottom "diffuser" section, and made cut outs for dual exhaust...it's meant for 03-05, and would take a little glassing to make the filler parts under the tails fit (they sit back about 3/4" from being flush) or you could just lob them off and use the 95-02 filler panels.
I have a FS thread here in the NE forum with pics of both if you are interested.
i dont know if that drift rear would flow with my sides and front.would look kinda akward... and that evo5 needs more work than what I'm capable of doing... where are you located at though?
]
i have a 95-02 bomber/skyline rear. was fitted to the car and never done anything with since motor had gone.
this is one that i have like i said test and fitted to my car just never did anything with since motor went bad.
bluedriftcavy(a.k.a. wayne) wrote:
this is one that i have like i said test and fitted to my car just never did anything with since motor went bad.
Wayne, that bumper is beyond hideous! I'm glad it never made it onto your car!!
