I figure i might as well throw this up there too....

I could also use a set of lowering springs... sportlines or similar... and lowering struts... koni's or similar... or loaded coilovers of good quality.. like grandava's

toying with the idea of a rear disc swap... so if you have any stuff for this laying about let me know...

and i also need a set of front steering knuckles... ya know the big cast iron things that hold the strut to the wheel bearings to the a-arm.... one of my caliper bolts got stripped pretty bad... and the threads are cut right into the knuckle... so i figure i should just replace the knuckles... and then use the old ones for some experimental mods...

I have a set of sportlines w/ koni yellows. Complete bolt on setup. I posted it but had a local sale that fell through so I haven't bothered to bump it.

http://www.j-body.org/forums/read.php?f=24&i=90644&t=90644

I'm going to be near Toledo Ohio on Sunday for mother's day if you wanted to meet up somewhere close to there.

Jon


12.770 @ 111.99 Intercooled Eaton M62