As the title states.... does anyone have any laying around... these are the last pieces i need to reassemble my motor
Edited 1 time(s). Last edited Monday, December 01, 2008 6:40 PM
Yep, I think. Well at the mothers...so I'll check this weekend.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Let me know...
i've been junk yard hopping for the past 6 weeks, ive yet to find the 93/94 LD2, and none of the yards allow you to bring in a jack, so it takes considerable more time to get the towers off than it should, since i have to find a cherry picker, and fight the lower motor mount without being able to raise the car up...
so i may have the towers by this weekend, but i definitely will still need the cam, so i'll let you know!!
I have a HO exhaust cam in the housing with ONLY 5000 miles on it. The cam was bought brand new and used on my 2.4 LD9 while it was alive. Check my sale thread in my sig if you're interested.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
I have 2 sets of towers...
thanks but i ended up getting the towers today.... i now just need the exhaust cam, which i may buy off Skilz depending on what the lift/duration specs are on it
If you are refering to his HO cam its .410/212
mitdr774 wrote:If you are refering to his HO cam its .410/212
So miller did use a .410 lift??
Its a HO cam as Jeremy stated in his post. Miller is Todd Miller.
so there is no difference between a miller performance cam and a GM HO cam??
JBO Chat User: SpeedlineZ wrote:mitdr774 wrote:If you are refering to his HO cam its .410/212
So miller did use a .410 lift??
Just like Clyde said, its .41" lift and 212 degrees duration. If you want a cam that makes power this is it, its the same cam that the highest hp n/a and the two highest hp turbo 2.4L's on this site use.
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
I may go for top 5 boosted with a bigger cam.
