ok, ive looked everywhere i could. to put a 05 ecotec into a 97! what has to be custom? where do i get it from? im new to this and dont know anybody around my area that has done it. actually nobody around here has done it. so come on. i need all the help i can get. could use a site where someone has done it and put it down step by step. if possible.
Auto or manual?
Proud member of Jbody of Kentucky ... Click on sig to go!
sounds a bit out of your league. see
here and
here
____________________________________________________________________________
my carDomain updated 8/2/08 Boosted at B-day!
its a manual and i wouldnt quite say that im out of my league. just trying to get my ducks in a row!
youll need a donor car because you'll have to basically rewire your entire car with the electical from the 05
Godspeed wrote:you'll need a donor car because you'll have to basically rewire your entire car with the electrical from the 05
in short you are better off buying a 02 or 03-05 ecotec functional car and save millions and swap the front ends.
____________________________________________________________________________
my carDomain updated 8/2/08 Boosted at B-day!
Jeff Payne wrote:its a manual and i wouldnt quite say that im out of my league. just trying to get my ducks in a row!
Well the big problem with having a manual is you're going to have to moch up your engine/tranny and then weld up your new rear tranny mount, the getreg mounts in a different location then your stock isuzu tranny. The overall project is not that hard it's just really long, if you need a how to then you probably shouldn't try. You strip your car bare and swap everything from the donor over just how it was. The only way I would recommend doing it is if you have another wrecked car to swap everything over, if not then it's going to be more of a PITA then it's worth.
Proud member of Jbody of Kentucky ... Click on sig to go!
is the 05 4door by chance?
