i'm selling my 2.4 stuff since i'm swapping a 2.2ecotec in. there is currently a knock from the motor. i haven't pulled it apart to find out yet could be another spun bearing. everything is still in the car and runs. so as soon as i get everything for the swap it will all be available
1. 2.3 ho intake, 56mm throttle body, w/ a modified throttle bracket $75
2. secret cams and 16 brand new lifters less 1k on them $275
3. 2.4 block with internals unknown whats wrong with it knocks at high rpms $free
4. two other separate heads one 01and the other 98 $50 each
5. 5 speed trans 116k on the clock also includes brand new clutch, flywheel, slave cylinder w/2k $300
6. 2 plastic intakes one 99+ one pre 99 $10 each
7. 2 sets of cam towers w/ stock cams $10 each
8. complete roof w/sunroof and wiring $100
9. pre 00 z24 kit some pieces have cracks $100
ill consider trades also.
i'm looking for stuff for the eco swap, front lip, import fighter sides, neon rear brake conversion, and just about anything to do with turboing the ecotec. thanks for looking and ill post pics as you ask for them.
dibs on the bumpers pending pics
pics?
the motor is a 97 with a nut welded on the knock sensor hole to operate w/00+ knock sensor other information in my profile
best pics i have right can get others
front
rear notice my cut outs for duals
and sides
hope these will work for u front bumper does not have any rips or cracks
what kind of clutch and flywheel
factory like from the auto zone or parts store from my understanding not a perfomance clutch
Did the HO intake do to much for you power wise and will it work with a short ram?
^You'll have to cut some of the intake off, but it will work.
Never Mind on the HO intake, for some reason i thought your profile said fort wayne at first. I dont feel like driving 9 hours for it.
I want the block if i pay for shipping will u ship It?
id have to pass on shipping the block cost way to much and way to hard to find something to ship it on
other stuff will be coming out with over the next 2 weeks
Well I'll come and pick up the block if its free. LOL
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
Is that an Isuzu or Getrag trans??
Jason
99 Z24 Supercharged
157hp/171tq - NA
LD9 for Life
-MD- LD9 wrote:Well I'll come and pick up the block if its free. LOL
if you want its yours. might even meet u up that way, theres an engine and tranny id like to get up there. also have a 98 block w/seized pistons if you want it to. my mom lives up there in burg hill area.
Blwn LD9 wrote:Is that an Isuzu or Getrag trans??
getrag its coming out of my 2001 z
adding a 1997 z2.4 ld9 pcm make offer
95-99 stock head lights w/ wiring poor condition $20
1. 2.3 ho intake, 56mm throttle body, w/ a modified throttle bracket $75
2. secret cams and 16 brand new lifters less 1k on them $275
3. 2.4 block with internals unknown whats wrong with it knocks at high rpms $free
4. two other separate heads one off a 01 2.4 and the other 982.4 $40 each
5. 5 speed trans 116k on the clock also includes brand new clutch, flywheel, slave cylinder w/2k $300
6. 2 plastic intakes one 99+ one pre 99 $10 each
7. 2 sets of cam towers w/ stock cams $10 each
8. pre 00 z24 kit some pieces have cracks $100
no sunroof for sale was destroyed. the other stuff make reasonable offers need this stuff gone too much clutter.
I'll take both son. Tell me when. Want a case of beer or something. LOL How far you from OU?
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
^^ if your talk about Ohio University main campus about 45 min. and it honestly depends what high ways u take to get there if your taking 77s to 70e to 37s to 33s to athens you actually drive in to lancaster to merge from 37 to 33. and thats not even 5 min from my house. and if your talkin Ohio University lancaster campus thats 5 min away. but like i said ill be pullin the engine in the next two weeks all depends how long it takes for my parts that i order to come in.
Maybe I can give you a alternator pulley, and a crank if I have any for the Eco.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
that would be awsome. you gonna be coming down this way? just let me know.
You know that the bellhousing is really different. You can use the internals, but you need a new transmission case. Easier to get a new transmission.
TRD Cav Fire wrote:You know that the bellhousing is really different. You can use the internals, but you need a new transmission case. Easier to get a new transmission.
yeah i know i have to do both engine and trans not to mention swap out the wiring harness. i already read and reread the swap post and have me nice list of what i need, want and so on. i probaly be taken pics as i go to.
What years are the block I have again please?
Thanks again man.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
one is a 98 <seized piston the other is a 97 with a nut weld on to hold the 01 knock sensor
UPDATED LIST: this is all out of the car laying around for you!!!!
1. 2.3 ho intake, 56mm throttle body, w/ a modified throttle bracket $75
2. secret cams and 16 brand new lifters less 1k on them $200
3. 5 speed trans 116k on the clock also includes brand new clutch, flywheel, slave cylinder w/2k $300
4. pre 00 z24 kit some pieces have cracks $100
5. 97 stock computer $BO
6. 01 engine wiring harness and computer $BO
7. 95-99 headlights with plugs and wire $BO
ill consider trades also.
i'm looking for stuff like wings west front lip, import fighter sides, neon rear brake conversion, and a carbon fiber hood. thanks for looking and ill post pics as you ask for them.
2.4 block with internals unknown whats wrong with it knocks at high rpms < -MD- LD9 HAS IT
two other separate heads one 01and the other < 98 BEING TO DOWN TO SCRAP
2 plastic intakes one 99+ one pre 99 < GARBAGE
2 sets of cam towers w/ stock cams < SCRAPPED
