I have the following for sale, plus a lot of stock parts for a 2000 z24 auto. So if your looking for something stock, just let me know and I will get it to you. I also have the motor and tranny for sale. I live in Grand Rapids area, and pickup on certain items is preferred.
DC Sports Header (New)
JBP Cams (New)
2.4 Lifters (New)
HO Manifold (dremeled)
HO Manifold (not dremeled)
2.3 Adapter Flange (New)
Lightweight Alternator Pulley (New)
Lightweight Crank Pulley (New)
AEM Crank Pulley (Used)
Custom Air Intake (Used)
Battery Relocation
Fiberglass Trunklid (Needs Repaint)
2.3 T.B.
Lower Motor Mount (Used)
Upper Enging Mount Insert (Used)
Pacesetter Header Ceramic (Used / Needs new downpipe)
Control Arm Bushings (New)
Slotter Rotors Front (Used for about 10 miles, yes 10, less but not sure how much)
Calipers Front (Used for about 10 miles ^^^)
Pads (I believe semi metallic Used for about 10 miles ^^^)
Rear Disc Neon Conversion (Everything minus left side rotor, Calipers New, Pads New, One rotor (slotted) New)
Front Strut bar (Used)
Aluminum spoiler (Don't flame hahaha, Used)
Gauge Overlay. White and lights up Blue (Used)
Stock Parts
2.4 Engine (8x,xxx Miles)
2.4 Auto Tranny (8x,xxx Miles)
Ls Sport Rims w/Tires
All windos
Lots More
I don't really want to put prices on anything, but if you can't come up with some type of offer just let me know, and I'll let you know what I'm looking to get for it, and if its negotiable then we can discuss it from there. Any questions just let me know. I can also get pictures of anything upon request. I work 2 jobs so please be patient with pictures as I sometimes don't get a chance to do anything in a day.
how much for the control arm bushings?
Proud member of Jbody of Kentucky ... Click on sig to go!
$20 shipped for the control arm bushings.
They are prothane, right?
Proud member of Jbody of Kentucky ... Click on sig to go!
PM sent. I'm only an hour south of you.
Anthing wrong with the motor? Was it running when pulled?
Yes the control are bushings are the ones karo sells.
The motor is still running, and actually still in the car. If anyone would like to stop by and hear it run, they are more then willing. just pm me and we can set something up.
Joe I got your pm, and sent one back.
Send me your paypal info...
Proud member of Jbody of Kentucky ... Click on sig to go!
My paypal is MikeM173@hotmail.com Please make sure to include all shipping info, and I will do my best to get it out as soon as possible.
pm sent back.
Everyone please keep in mind that if i don't get back to you, its just because I keep very busy. I will do what I can to get back to everyone as soon as possible and also get any pictures that people would like. If their is anything anyone wants to come and see, just let me know, and we can arrange something through a pm.
How much for the adapter flange?
I'm back from the dead.
Currently Driving: RSX Type-S.
My Cavalier Burnt up :-(
/ what kind of rotors?
I'm back from the dead.
Currently Driving: RSX Type-S.
My Cavalier Burnt up :-(
$60 shipped for the adapter flange.
All the rotors are powerslot. The rear neon rotors are being held right now, but if you message me, I can keep you in line if you want those and the other person falls through. the front cavy ones are not spoken for yet.
Cancel me on the rears, I'd love the brackets/calipers but I'd rather see you sell it all together and get the most money possible for them.
As said in the PM I will take the front calipers though.
...and I'm no 100% sure, but I'm willing to bet Gregg takes that 2.4l off your hands.
Just wanted to put all that out there versus PM
.
Well if i sell everything together for the rear i will probably lose just as much money. If you just want the hardware and calipers, then just message me and i'm sure we can work something out.
I'll just hope to come up in person with Gregg very soon and we can work out all these tiny details then
.
How much for the batt. relocation kit?I'm in Flint
15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"
how much would u want for the header
13.1 @ 115
How much are you wanting for the motor? Do I save money pulling it myself if you have the tools there... I could maybe borrow a lift if I have to.
you have a pm.
_______________________________________________________________________
my carDomain updated 9/2/07 I've got premium. Yes I do. I've got premium. How 'bout you?
TRD Cav Fire wrote:How much are you wanting for the motor? Do I save money pulling it myself if you have the tools there... I could maybe borrow a lift if I have to.
No no, and no
.
Edited 1 time(s). Last edited Saturday, November 03, 2007 3:11 PM
Hey hey hey I asked in the post about it fair and simple. You know I need a motor for my plans. All I know you asked for before was the brakes.
Payment sent!
Proud member of Jbody of Kentucky ... Click on sig to go!
