i'm looking for an eibach front sway bar for my 01 cavalier....i have the rear and i was hoping to find someone who is tryin to sell the front. i'd also take and addco one, i was just hoping to keep the eibach theme going....so if you have an addco or eibach front sway bar for sale let me know asap! thanks everyone!
i have the stock 22 mm sway bar
$25 and its yours
thats what i have on there now unfortunately
lol.....thanks though!
i have the eibach...its heavy lol
Ben D(Silver J on 1Nines) wrote:thats what i have on there now unfortunately lol.....thanks though!
If you have the stock 22mm toss on a set of Energy Suspension poly endlinks from Autozone.
It helped a @!#$load on my '01 Z24. I also had the Addco rear. Not that it's better than replacing the front bar, but it's $20 and one helluva improvement. Trust me.
Just a suggestion if you're not really wanting to drop all that much money right now.
Good info Joe,, I have the stock 2.2 one on my car and never even thought about upgrading the endlinks.. Anybody know what mm the stock 2.2 one is?
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Being a 2.2 originally I'll assume you have the FE1 suspension which only had an 18mm bar. The FE2 utitilized the stock 22mm (Z24 mainly).
Gotcha.. Thanks... I think I'll look for a sock Z at the yard, if not ill hit up Autozone for the endlinks.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
WHITECAVY wrote:Gotcha.. Thanks... I think I'll look for a sock Z at the yard, if not ill hit up Autozone for the endlinks.
Do both!
Also my buddie's '03 LS Sport came factory with a 24mm bar....doubt you have any '03+ LS Sports near ya, but a heads-up doesn't hurt.
24mm? Damnn haha.. Bet, ill do both
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
I did those endlinks on the White Z David and it helped out a good deal.
TRD Cav Fire wrote:I did those endlinks on the White Z David and it helped out a good deal.
yeah, using my extra bushings.....
I put new endlinks on my car too, helped a bunch
If you have the stock 22mm toss on a set of Energy Suspension poly endlinks from Autozone.
Thanks for the info. I need to do this.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
