That will fit my 2.4L with the HO mani.. Does anybody have something laying around that they KNOW will fit this intake manifold and can rout around the battery? I really dont wanna chop up my 2.2 CAI lol.. Please someone lemme know..

Thanks.









~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

WHITECAVY wrote:That will fit my 2.4L with the HO mani.. Does anybody have something laying around that they KNOW will fit this intake manifold and can rout around the battery? I really dont wanna chop up my 2.2 CAI lol.. Please someone lemme know..
Thanks.

Well my matrix short ram fit just fine, with out modification, but it was on a LO manifold....and a tight fit.
If I still had my computer hook up at home I would upload the pics.




PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

Does anybody have a stock plastic S tube for the 2.4 laying around?











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

If I could help you I really would...sorry! (ecotec)

SiLvEr StRiPeY 04 wrote:If I could help you I really would...sorry! (ecotec)

my carDomain updated 7/6/06

I've got premium. Yes I do. I've got premium. How 'bout you?

if you feel like moving the battery up in the engine bay (very easy) you have a straight shot comming out of the HO manifold down to the inner fender well using a 90degree elbow, heres a pic of mine and it works and sounds great.

just took my intake off my HO mani yesterday cuz im goin turbo no need for it any more, it may fit around the battery but i had it routed down into the fender area ( old pic in pro but not much to look at ) and its not too pretty now from shovin it down there but it worked amazingly pm me if interested or if you want me to get a pic its just layin in my garage

OneBadZ24- I want to do that straight shot down the fender well but how do you remove the battery tray? lol Isnt it drilled in?

gmanz24- Thanks man, Ill let ya know











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

i thought it was welded in...im listening too

I'm almost sure that it is spot welded in, but not to hard to move I don't think. Just takes some time to do so.

WHITECAVY wrote:OneBadZ24- I want to do that straight shot down the fender well but how do you remove the battery tray? lol Isnt it drilled in?

gmanz24- Thanks man, Ill let ya know

heres a couple pics i took during the install, there are more holes on the tray than actual weld spots due to a few spots i chose to drill through and make new mounting points. Total it took me about 30 mins and cost me about 5 bux with nuts and bolts. Uses all factory cables, no extending... nothing... works perfect. I did however remove the wiper fluid resivor to run the piping down.









grab a 1/2 inch METAL drill bit and a good drill and drill away... the only thing i would be carefull about is one of the holes on the tray has the headlight wires underneeth it. Drill slow and you should be ok. In the first pic it is around one of the 2 LOWER LEFT ones.

Thanks for those pictures man.. I will try to tackle this project this weekend











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

Hey David want to go out to my place and do mine too! Thanks

Trey PM me you address, I need it for your Invite




Yes it is a cavalier deal with it

Oh yea David get some pics up I wanna see how well it looks




Yes it is a cavalier deal with it

Mike, look in the photo section

btw, somethigns wrong with my sig lol











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

AWWW damnnnn, the pictures are gone of the battery tray relocation











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

WHITECAVY wrote:AWWW damnnnn, the pictures are gone of the battery tray relocation

yea wtf? lol



2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |

hey if you still want a cold air, I got one. and I have a stock s-tube

^^ Thanks, I got the stock Z s-tube, but its too damn wide to fit because of the battery and the big coolant hose











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

well i have a hacked ebay cold air that fit on mine with the ho mani. lol, you can have it for cheap if you wanna try it.

WHITECAVY wrote:AWWW damnnnn, the pictures are gone of the battery tray relocation

sorry, moved them to a new folder... dam photobucket...

Thanks man, Im going to attempt this this week.. Btw, did you install these bolts with nuts to hold the botls in? Im just wondering how you access the nuts from underneath. I could take a look here in a lil bit.











~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

WHITECAVY wrote:Thanks man, Im going to attempt this this week.. Btw, did you install these bolts with nuts to hold the botls in? Im just wondering how you access the nuts from underneath. I could take a look here in a lil bit.

the bolts i got are 9/16th i believe, they are just a bit bigger than the 1/2inch hole drilled. So i put a hex bit on my drill and muscled them in there creating a thread for them. They are solid as a rock on there, I wouldnt worry about bolts.

or trying to access nutz from underneeth

get ahold of JayVan (qwik2k2z24) hes done it also with help from the pics and i believe he didnt use nutz either.