I used to have a turbo 2200 but have been working on putting all the stuff from that over to another car. I can get a decent deal on a m62 kit and I'm getting frustrated with this whole ordeal so I'm selling what I won't need for the m62. $500 plus shipping takes all you see below.

An ecotec log manifold (the cast one from Canada)
An OHV manifold (eBay)
Ebay charge pipes, couplers, clamps
EBay intercooler
tial wastegate, LG red, SM blue, SM yellow springs
HKS SSQV limited edition black bov
1g dsm bov
TB coupler
All hoses, lines, and fittings
OHV dipstick relocation
Downpipe for OHV (flanges are good to use for ecotec downpipe)
Ball and spring boost control
Nissan t3 turbo which has ~5000 miles since rebuilt, also hasn't seen use in nearly 3 years

Also have the ecotec intake modified for use with the cobalt tmap

Its official, im parting it all. ask for pix and you shall receive

75 - An ecotec log manifold (the cast one from Canada)
50 - an OHV manifold (eBay) gasket included
50 -Ebay charge pipes, couplers, clamps
50 - EBay intercooler
50 - tial wastegate, LG red, SM blue, SM yellow spring
75 -HKS SSQV limited edition black bov
25 - 1g dsm bov and flange pipioe
15 - TB coupler
20 - All hoses, lines, and fittings
5 - OHV dipstick relocation
20 - Downpipe for OHV (flanges are good to use for ecotec downpipe)
10 - Ball and spring boost control
150 - Nissan t3 turbo which has ~5000 miles since rebuilt, also hasn't seen use in 3 years
15 - 02 rail and lines
25 - Ecotec intake manifold modified for use with TMAP sensor and pcv fixed for boost

75 - An ecotec log manifold (the cast one from Canada)
50 - an OHV manifold (eBay) gasket included
50 - tial wastegate, LG red, SM blue, SM yellow spring
25 - 1g dsm bov and flange pipioe
20 - misc hoses, lines, and fittings
5 - OHV dipstick relocation
20 - Downpipe for OHV (flanges are good to use for ecotec downpipe)
10 - Ball and spring boost control
150 - Nissan t3 turbo which has ~5000 miles since rebuilt, also hasn't seen use in 3 years
15 - 02 rail and lines

pic of turbo? trim and ar?


running rich? turn the boost up

You have a PM




Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!

Turbo is a t3 60 trim with. 63 a/r. I'm working on getting pics taken, been super busy this past week. Hopefully tonight tho

TurboFire wrote:pic of turbo? trim and ar?

T3 60 trim .63 a/r

Eco manifold, wastegate, oil and vacation lines, 02 rail and lines, boost control gone

New thread started here's what I have left...