first off let me say that i do not own this car, it was given to me by a friend who i was trying to help out. which in turn got me oweing on it. As soon as i sell it and forward him the money from sale, i will have title, then as will you.
but non the less the car is sweet, BUT there are some issues.
the car WAS involved in a accident a few years ago, which bent the driver front bumper support inward. i was told that it is fixable. depending how youd want to go about it it can be as little as 400$ or if you wanna be stupid spend 1500+$.
it will need a hood, and all front end parts.
the car was heavily involved with alot of drag racing and has many, many upgrades.
here they all are:
Engine
•Eagle connecting rods
•Wiseco 8.9:1 compression pistons
•Level Zero Motorsports balance shaft delete kit
•Cometic 87mm .030 thickness head gasket
•Patriot Stage 2 head with 1mm oversized valves
•RK Sport under-driven and lightweight crank pulley
•AEM over-driven and lightweight alternator pulley
•Custom bored straight-thru 62mm throttle body
•Prothane polyurethane lower motor mount
•RK Sport upper motor mount
•Prothane Polyurethane transmission mounts
•SPEC stage 3+ clutch
•Innovate LM1 RPM wideband kit
•HP Tuners ECU tuning software
•MSD DIS2 HO ignition box conversion
•MSD Blaster coils
•MSD 8.5mm Super Conductor spark plug wires
•Champion copper SRT4 spark plugs
•Team Green LSD Insert
•ARP headstuds
Suspension/Wheels/Brakes
•Custom made swaybar endlinks with Prothane polyurethane bushings
•Front and Rear Freedom Designs strut tower bars
•Prothane polyurethane control arm bushings
•Prothane greasable swaybar mount bushings custom adapted for use on car
•SP Performance nickel coated drilled and slotted brake rotors
•EBC Yellowstuff Brake Pads
Interior
•B&M short shifter
•Interior accent painting
•Blitz Turbo Timer
•Lotek 3 Gauge A-Pillar Pod
•Stewart Warner 0-100PSI Fuel pressure gauge
•Stewart Warner 0-100PSI Oil pressure gauge
•Stewart Warner 600F-2200F EGT gauge
•Stewart Warner 30inHg/40PSI Boost gauge custom mounted behind steering wheel
•Stewart Warner “Ultra-Shift Light” digital tachometer / shiftlight combo custom mounted behind steering wheel
•S&W Racecars 5 point roll cage system
again in cars current state it does not run, needs ignition rewired, and a new battery cutoff switch, and misc things.
ive been told i paid too much for the car, but really for 3,000$ it isnt a bad project if you have time, which i dont at the moment.
all in all id like to get 4,000-4500$ for the vehicle as a whole.
from getting it from illinois to here and storage i have spend 1100$, and id like to try and get that back any or all of it if possible.
there will be more parts coming to me after the vehicle is paid off from original owner.
so that will be an added bonus i suppose.
and if i cannot sell, I MAY consider parting it out. only if i can make enough to just pay it off and get rid of it.
I cannot get pictures that show the whole car itself off at the moment, as it is on jackstands under a car cover which is under 4 feet of that fantastic snow.
so with all this said, thank you for reading this, and i hope something happens so i can move out of state and not have to worry about taking this with me.
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
to anyone interested in the car, i do not live all that far from Matt here, and
have a whole 03+ LSS front [fenders, hood, front bumper and headlights]
if you want all the parts to replace any damaged parts in the front end.
Would sell all for $350 O.B.O. with the purchase of the vehicle.
ok after tomorrow, im going to let this go to full part out.
need to have this vehicle gone by april 13.
so, send me your reasonable offers along with the particular item.
if anything even becomes of this thread.
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
Pics of Lower Mount, Sway bar endlinks, and do you have an oil pressure sending unit?
ill work on getting you pics, and yes it has the sending unit still.
im going there today and tomorrow, to start clearing snow out
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
not a problem
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
Would you be willing to sell me HP Tuners? I have been looking for a used copy for a very long time now!
How much for the motor and trans
i have to see where the hpt is at.
and i sold the trans already, i can off the motor for like 2700 or so
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
willing to sell motor with a hahn stg 2 kit, for 3000$
everything goes with it, to make for a drop n go install
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
working on the pics, didnt get alot accomplished.
i did however manage to shovel 4 feet of snow from around the car.
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
Is the hpt sold? If not how much for it. Got money ready to send!
and ill have more pics soon, couldnt get rest as it was getting dark and camera pooed out.
as far as the hpt, its sold. sorry.
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
working on it, mounts are shot. checked them out.
and the wideband is the innovative with the big box
im working on seeing if i can remove it all from the car without effin it up.
after i get it done ill pm you
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
How many miles are on that motor ?
How much for the steering wheel/hub adapter shipped to 54220?
Would you part the engine ?
around 5k on motor
steering wheel is gone
not parting the motor out
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
Understandable, I am looking for a bunch of aftermarket eco parts if anyone has them or knows of some people with them.
