parting out 96' Sunfire with 2.4(and some more stuff) - South East Region Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
parting out 96' Sunfire with 2.4(and some more stuff)
Monday, August 17, 2009 6:32 AM
1996 Sunfire coupe manual 2.4:
The car was t-boned on the drivers side, door is destroyed and quarter panel would need ALOT of work to get back into shape.
The following has been removed:
Front bumper, fenders, hood, headlights, clutch master cylinder, center console.

It has a ok tan interior, dash is in great condition along with rear panels and seats.
Besides the drivers side door and quarter, the rest of the car is in good condition.
Trunk, tail lights, rear bumper, ect are salvageable.

Has a 2.4 with around 140k miles, needs new alternator.
The transmission is stuck in gear.

Also has alloy wheels.

has a brand new front window and steering column.
heres a quick picture:


I'll part anything off the car, or sell motor and everything on car for $300
Smaller parts I'll ship at buyers cost, bigger items are pick up only.



Also have a set of 95-99 Z24 rims(no tires, rims only) they have some curb rash on 2.
asking $100

Have a 95-02 Fiberglass Ram Air hood, will take a stock hood+$80 for it
Needs some attention to really look good again.


Call me at 828-682-0103 or txt me at 828-458-8460


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -


Re: parting out 96' Sunfire with 2.4(and some more stuff)
Monday, August 17, 2009 7:20 AM
So it was a SE model with the 2.4? I'll probably get the ecu and wiring harness from it.





Re: parting out 96' Sunfire with 2.4(and some more stuff)
Tuesday, August 18, 2009 5:45 AM
Micah(Shadowfire) wrote:So it was a SE model with the 2.4? I'll probably get the ecu and wiring harness from it.



yea I didn't believe the guy at first. but it sure is.

as for parts, it has power mirrors, windows and locks and cruise control if anyones interested in those.
the rims are 15"


engine pics.




<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Re: parting out 96' Sunfire with 2.4(and some more stuff)
Tuesday, August 18, 2009 6:57 AM
Do you have the Stock CD player?



Re: parting out 96' Sunfire with 2.4(and some more stuff)
Tuesday, August 18, 2009 4:32 PM
Kim The F.M.I.L.F wrote:Do you have the Stock CD player?
you find a cd player kim and i'll make it work for free

mike should jump on this.....

i would be interested in the front but...................... you have plans i think



ʇı ɹǝʍo7 | ǝcoMonstǝrs

Re: parting out 96' Sunfire with 2.4(and some more stuff)
Tuesday, August 18, 2009 5:51 PM
Kim The F.M.I.L.F wrote:Do you have the Stock CD player?



i do. its sitting in my trunk. i can bring it to fluffy on thursday if you want.



Re: parting out 96' Sunfire with 2.4(and some more stuff)
Tuesday, August 18, 2009 10:25 PM
what cluster does it have?





Re: parting out 96' Sunfire with 2.4(and some more stuff)
Wednesday, August 19, 2009 5:07 AM
^^One that won't work in your car.





Re: parting out 96' Sunfire with 2.4(and some more stuff)
Wednesday, August 19, 2009 5:55 AM
think it only works with the stock radio, but it has radio controls on the steering wheel.


Yeah the front end is already gone, motor is pending a sale.
as is the harness and ecu is pending.



<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Re: parting out 96' Sunfire with 2.4(and some more stuff)
Wednesday, August 19, 2009 6:23 AM
ahhh why with the tan!!!


_______________________________________________________
J-body.org Join date: Monday, January 21, 2002

AIM & Y!: COGcaviZ24
Re: parting out 96' Sunfire with 2.4(and some more stuff)
Wednesday, August 19, 2009 7:57 AM
I'll get the harness, and ecu. It's just a thing of when I'll be able to get up there. Will those radio controls separate from the steering wheel? If it will I may buy it, and the stock radio too. I already have a leather steering wheel.






Re: parting out 96' Sunfire with 2.4(and some more stuff)
Thursday, August 20, 2009 5:14 AM
Micah(Shadowfire) wrote:I'll get the harness, and ecu. It's just a thing of when I'll be able to get up there. Will those radio controls separate from the steering wheel? If it will I may buy it, and the stock radio too. I already have a leather steering wheel.



I'll check on the radio controls, but it does not have a stock radio in it.


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Re: parting out 96' Sunfire with 2.4(and some more stuff)
Thursday, August 20, 2009 7:12 AM
Bummer.





Re: parting out 96' Sunfire with 2.4(and some more stuff)
Wednesday, August 26, 2009 5:33 AM
The 2.4 is back up for sale
Looking to get around $300 for it, does not have intake manifold.


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Re: parting out 96' Sunfire with 2.4(and some more stuff)
Friday, September 04, 2009 4:53 AM
Anyone want the 2.4 I really need the car gone
$250 for the motor, it needs a intake manifold but everything works and runs fine.
140k miles


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Re: parting out 96' Sunfire with 2.4(and some more stuff)
Friday, September 04, 2009 11:04 AM
Not taking off the intake manifold, all it needs is the plastic coolant outlet pipe on the drivers side(where the engine temp sensor goes).
This is a great running motor!


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Re: parting out 96' Sunfire with 2.4(and some more stuff)
Saturday, September 05, 2009 7:05 PM
pm'ed



Re: parting out 96' Sunfire with 2.4(and some more stuff)
Saturday, September 12, 2009 9:54 PM
do you still have the hood and driver fender


RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
Re: parting out 96' Sunfire with 2.4(and some more stuff)
Saturday, September 12, 2009 10:05 PM
Just saw this post!

Need the SRS Airbag Cover and Drivers side door panel if its not busted to hell. If it is just the part around the power locks. If you can get me a shipping quote for atleast that part and the SRS cover to 22554 I will purchase asap. Thanks!





Re: parting out 96' Sunfire with 2.4(and some more stuff)
Monday, September 14, 2009 11:04 AM
$200 for the motor and shell.
I need this gone by the end of the month(front windshield is gone).


Rahjee- you gots PM'd


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Re: parting out 96' Sunfire with 2.4(and some more stuff)
Wednesday, September 16, 2009 1:16 PM
$200 for everything left, just bring a dolly and we'll slap it on and away you go.


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -


Re: parting out 96' Sunfire with 2.4(and some more stuff)
Monday, September 21, 2009 5:49 AM
$150 takes it all! you just gotta haul it off...


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search