Hey guys do you know who is selling a block of a 2000 and up LD9. Any help would be appreciated. Thank you, Tony
actually, I'm not too sure what yr the motor is... I know the car was a '97, but it wasnt the original motor that got built and dumped into the car. if you know of any identifying marks, I can check it tomorrow when I get home from work. just in case it is, what ya lookin to spend?
R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Where do you live so I can see the engine and see if it is the same head design as mine. I am around ucf area. It will help me alot thanks for the reply.
I will appreciate that, my email is elbi2000@hotmail.com. thanks again
you go to ucf? or just in the area?
Price: Core.
ENGINE - COMPLETE $199.99 $59.25
ENGINE BLOCK $54.99 $17.25
ENGINE W/ HEADS (INTAKE) $109.99 $23.25
ENGINE W/ HEADS (NO INTAKE) $84.99 $19.99
http://orlando.upullandpay.com/
Thanks for the pics. I was busy working this weekend. Is that engine has a EGR. I think it does because I see the hose underneath the black air box. Hey Daniel do you know if they have a 2000 up LD9 or I have to go and check myself. Thanks for the help guys. And yes I do go to UCF, why?
You are looking for a running motor correct? Evan's motor is not running, it needs rebuilt. Check www.car-parts.com I saw a couple in FL for abround $700 with 75k on them. Also the block are the same on all LD9's. If you are not looking for a running motor and 2.4 block will work. Robert and I have a 2001 2.4 block. Spun a rod bearing, still has crank (might need to be replaced), and stock rods and pistons in it. No head.
FU Tuning
John, mine was a running motor. In fact, its in the same condition as the one you mentioned (same EXACT thing happened.. my crank might even be reuseable).. except mine has a head (needs lifters) and forged pistons... and mine only had 30-40k on it
R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
Evan, I am taking the head off during this week coming up. If it is what I think it is would you sell the pistons by itself? An if so how much. Thanks again guys for the help and patience.
Evan just another question, what are the specs on those JE forged pistons? Are they overbore or standard? What compression?
Thanks again. Antonio
How much would you let them go for? Thanks, Antonio
So you would sell the entire engine for $200 on the other forum and sell me the piston for $250?!!!
"forged pistons" sounds better than "non-running motor", dont it? that, and I wouldnt have to take the motor back apart... besides, you can make me an offer.. that was just a round figure to start with, 'cause EVERYONE like to haggle. trust me, I'm not a low-jacker.. you can ask ANYBODY in here
R.I.P. JessE Gerard 7.11.87 - 1.25.08
The Radiation Nation Facebook Twitter Twisted Metal Alliance
I'll give you $160 for the entire engine. Thanks again, and Im not calling youa low jacker I understand there is more work taking the engine apart.
Thanks Evan, I will pick it up no problem. I will be busy these couple of days because Im in my internship but maybe I have time wednesday night after the intern. You let me know what days you have time to meet and pick up the engine. Thanks again, Antonio
