this is the center of my front bumper that i'm making for my chevy lumina. i need some help deciding what the sides are to look like i'm at a loss with idea's right now i dont now what they are going to look like so i need some help if anyone has some idea's plz let me know. if no idea's just let me know what you think.







well let me know what you think.

Quote:

this is the center of my front bumper that i'm making for my chevy lumina.

I dont think using styrafoam for a bumper is a good idea.

























J/P

On a serious note. I think you should try to make it look kinda like the type J kit.



two little ones on the side that look similar to the larger middle one.


____________________________________________________________________

Madjack wrote:Like I said before, building an engine like ours (2.2 or 2200) is a painstaking chore , since there is so few custom made parts. It's frustrating to me too, but that's what I like about doing this engine, it's the challenge.

the foam is just a start for the mold. but i see your point let me do another front side and i'll put some pic's up tomorrow.

i'm having a slight problem visualizing that on a lumina, it looks like its HUGE...
i don't suppose you could take a pic of that piece in front of the actual car?

are you gonna keep it all squared up, or is it going to be rounded off?

Jbody2nr <--- in regards to "I dont think using styrafoam for a bumper is a good idea" if you have any stock bumber, and maybe some aftermarket ones, they do use sturofoam... it's just that those are specifically molded...... (yes i realize, it was a joke)



wait for it... wait for it... NOW GO!! ---> '02 LS Sport <---
Yahoo IM : buzz122 AIM : buzz122cav

yeah i'm not going to have it square it's going to be rounded off. it's 17" tall and it's 6" from touching the ground.

kinda reminds me of the type-j and drift put together... if you squint and tilt your head juust right I'm interested in seeing how this turns out.

Thanks
Shaun
www.ShowStopperTuning.com