im in need of parts for my 2.2 ECO 03 Sunfire
ECOtec Header (or the downpipe either to the cat or past it)
ECOtec Tranny (5 speed)
ECOtec Clutch
ECOtec intake
ECOtec Axles
just PM me what you got and how much you want, and ill get back to you if i'll take it
thanks
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
Are you looking for OEM or aftermarket parts?
I have an Eco exhaust manifold I want gone
i have a stock exaust manifold
ill take stock for everything besides a header, i want a header
i found alot of this stuff, from other JBO members, all i need now is --
5 speed transmission
5 speed ecotec Axles
thanks guys
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
Any J axle from 2000 and up will work. The pre 2k's might work as well, but I know for sure all of the 2000+ 5spd axles are the same.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
Skunk wrote:Any J axle from 2000 and up will work. The pre 2k's might work as well, but I know for sure all of the 2000+ 5spd axles are the same.
so, i know im gonna look stupid, but your saying that the axles from my 2.4TC out of my 2000 z24 will work for my ecotec 5 speed tranny?
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
should, they both use a getrag trans
so why my buddy removed the axles, he cut the CV boot... can i just get a new boot, or are these axles toast?
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
any 5 spd axle is the same..i have a getrag tranny for sale..
Pozr wrote:so why my buddy removed the axles, he cut the CV boot... can i just get a new boot, or are these axles toast?
if he cut the cv boot to remove them, you probably shouldn't let him work on your car anymore
as long as they were driven on and all the grease is still in them, put a new boot on them. if the grease is gone or have been driven on without a boot get new axles
Yeah you could just put a new boot, but as was stated, if it was driven on, don't even bother, just go down to your local autoparts store turn it in as your core and get a new axle, they are only like 50-60 down here in IL.
---------------------------------------------------
4 Cams...32 Valves...5 Liters...This Could Get Fun!
