Well the car is on Ebay right now, but it doesnt look like its going to sell, it doesnt end until 10pm, so, if for some reason the car gets a bid and sells before 10pm then these parts WILL NOT be for sale. Here they are, MAKE OFFERS ON THESE PARTS

I have decided to move into the direction of either a Suby, or a JDM ITR Teggy.

DO NOT message me and ask how much, make me an offer and we will go from there, I dont want to ship big things like the hood, seats, body kit, or wheels, all parts are pretty much less than 2 weeks old and brand new. Heres a list of everything for sale.

The few pictures I do have are in my registry, I dont own a digital camera so pics could take a while.

Engine:

* Cartech Begi 2025 Adj. FMU
* Innovative Wideband 02 Sensor
* MSD 8.5mm Wires
* MSD Coil Blocks
* AC Delco Coils
* Camaro IAT Sensor
* Prothane Lower Engine Mount
* Prothane Upper Engine Mount
* CenterForce Dual Friction Clutch
* GM Power Pulley
* Custom 2.3 HO Intake Manifold
* RSM Racing 59mm Throttle Body
* Garrett T04 Turbo
* Steel Braided Oil Lines
* Turbo XS RFL BOV
* Turbo XS Boost Controller
* Custom Turbo Manifold
* HKS Wastegate
* Custom 2.5in Downpipe
* Holley Forced Induction Fuel Pump
* ApexI Turbo Timer
* Port And Polished Head
* SS Valves
* SS Valve Springs
* Ford Green Top 440cc Injectors
* Spearco Intercooler
* Custom 2.5inch Exhaust
* Turbonetics Silicon Connectors
* Charge Pipes Painted Black
*Polished Compressor Housing
* T-Bolt Clamps
* Carbon Fiber Fuse Box Cover
* Carbon Fiber Brake Fluid Cover
* Carbon Fiber Coolant Resivoir Cover
* Autometer Black Face Fuel Pressure Gauge
* Fuel Rail Painted Black

Suspension/Wheels/Brakes:

* Freedom Design Strut Tower Brace
* Prothane Front End Link Bushings
* RotoTech Cross Drilled And Slotted Rotors
* Ti22 Titanium Brake Pads
* Prothane Control Arm Bushings
* Ground Control Coilovers
* Koni Yellows
* 17inch Gunmetallic Rota Boosts
* 225/45/R17 Nitto Neo Gen Tires

Interior:

* Black Sparco Torino 2 Racing Seats
* Custom Seat Brackets
* Sparco 4 Point Harnesses
* RK Sport White Face Gauges
* Lotek Triple Gauge Pod
* Autometer Boost Gauge
* Autometer Air/Fuel Gauge
* Autometer Oil Pressure Gauge
* Innovative Wideband Black Face Gauge
* Custom Fiberglassed Radio Bezel
* Autometer Volt Gauge

Exterior:
* 00+ Toyota Cavalier Tailights
* 2000 Headlight Conversion
* Custom Black Headlights
* Custom Black Corners
* Wings West W Type Lip Kit
* ViS OEM Carbon Fiber Hood

Audio:

* Alpine CD Player
* Soundstorm 660 4 CH AMP
* 2 12in Rockford Fosgate Hx2's

Wow this is some nice stuff - check out my email.. thanks!



Check out my Part Out List!! Great Prices !! http://www.j-body.org/classifieds/detail/52925/

emailed get back at me

I highly recommend Jay. He is a great guy!

and he is my love slave.

Lurch wrote:I highly recommend Jay. He is a great guy!

and he is my love slave.

Hmm good to know...





Check out my Part Out List!! Great Prices !! http://www.j-body.org/classifieds/detail/52925/

Lurch wrote:I highly recommend Jay. He is a great guy!

and he is my love slave.

<3

REVISED LIST OF WHATS AVAILABLE!!!!!!!!!!!!!!!!!!!!

Engine:

* Cartech Begi 2025 Adj. FMU
* MSD 8.5mm Wires
* MSD Coil Blocks
* AC Delco Coils
* Camaro IAT Sensor
* Prothane Lower Engine Mount
* Prothane Upper Engine Mount
* CenterForce Dual Friction Clutch
* GM Power Pulley
* Custom 2.3 HO Intake Manifold
* RSM Racing 59mm Throttle Body
Garrett T04 Turbo
* Steel Braided Oil Lines
* Turbo XS RFL BOV
* Turbo XS Boost Controller
* Custom Turbo Manifold
* HKS Wastegate
* Custom 2.5in Downpipe
* Holley Forced Induction Fuel Pump
* ApexI Turbo Timer
* Port And Polished Head
* SS Valves
* SS Valve Springs
* Ford Green Top 440cc Injectors
* Spearco Intercooler
* Custom 2.5inch Exhaust
* Turbonetics Silicon Connectors
* Charge Pipes Painted Black
* Heated O2 Sensor
* O2 Simulator
*Polished Compressor Housing
* T-Bolt Clamps
* Autometer Black Face Fuel Pressure Gauge
* Fuel Rail Painted Black

Suspension/Wheels/Brakes:

* Freedom Design Strut Tower Brace
* Prothane Front End Link Bushings
* RotoTech Cross Drilled And Slotted Rotors
* Ti22 Titanium Brake Pads
* Prothane Control Arm Bushings
* Ground Control Coilovers
* Koni Yellows
* 17inch Gunmetallic Rota Boosts
* 225/45/R17 Nitto Neo Gen Tires

Interior:

* Black Sparco Torino 2 Racing Seats
* Custom Seat Brackets
* Sparco 4 Point Harnesses
* RK Sport White Face Gauges
* Short Shifter
* APC Carbon Look Shift Knob
* White Faced HVAC
* White Faced Dimmer Panel
* Autometer Boost Gauge
* Autometer Oil Pressure Gauge
* Custom Fiberglassed Radio Bezel
* Autometer Volt Gauge

Exterior:

* 00+ Toyota Cavalier Tailights
* ViS OEM Carbon Fiber Hood

Audio:

* Alpine CD Player
* Soundstorm 660 4 CH AMP
* 2 12in Rockford Fosgate Hx2's

Umm.........so did you get my IM did you sell the carbon parts, or is that they are gone to me?


Jason



USACi =>146.9db
14.88 @ 90.73MPH =>GM Charger, Motor Mounts, Catback exhaust

first dibs on the tails...can I get a few pics?? thanks!!

2NVUS4U wrote:Umm.........so did you get my IM did you sell the carbon parts, or is that they are gone to me?


Jason

Sorry didnt reply cuz they got sold, it was first come first serve.

As for the tails, they are sold as well.

I am interested in the heated 02 sensor and IAT sensor, as well as the short throw. Possible the turbo timer.

Fst Cavy wrote:I am interested in the heated 02 sensor and IAT sensor, as well as the short throw. Possible the turbo timer.

Heated o2 sensor can be done on your own, with a few extra wires.

The camaro iat sensor is going for 20 bux.

The turbo timer would be 125.

how much you asking for the rims and the hood?

love forever
jake

Jake wrote:how much you asking for the rims and the hood?

love forever
jake

Hood is goin for 400 sir.

Wheels goin for 850 with brand new Nitto Neo Gens.

<3

Any dyno #'s? Just wondering.

Tony Hiller wrote:Any dyno #'s? Just wondering.

Never been dynoed.

too bad i dont live closer. just curious on what you were asking.

later

You north centralians are cheap!

Isnt it a heated 02 sensor from a GTP? I would be interested in how you did yours with a few extra wires

Any pics on radio bezel?

Fst Cavy wrote:Isnt it a heated 02 sensor from a GTP? I would be interested in how you did yours with a few extra wires

Hit me up sometimes and Ill explain.

No pics of the bezel, but its smoothed and painted to match the car, and it has a gauge where the cig lighter would be, all done by JBO Known Brandon Fetter at F&S.

REVISED LIST OF WHATS AVAILABLE!!!!!!!!!!!!!!!!!!!!

Engine:

* Cartech Begi 2025 Adj. FMU
* MSD 8.5mm Wires
* MSD Coil Blocks
* AC Delco Coils
* Camaro IAT Sensor
* Prothane Lower Engine Mount
* Prothane Upper Engine Mount
* CenterForce Dual Friction Clutch
* GM Power Pulley
* Garrett T04 Turbo
* Steel Braided Oil Lines
* Turbo XS RFL BOV
* Turbo XS Boost Controller
* Custom Turbo Manifold
* HKS Wastegate
* Custom 2.5in Downpipe
* Holley Forced Induction Fuel Pump
* ApexI Turbo Timer
* Port And Polished Head
* SS Valves
* SS Valve Springs
* RC Engineering 320cc Injectors
* Spearco Intercooler
* Custom 2.5inch Exhaust
* Turbonetics Silicon Connectors
* Charge Pipes Painted Black
* Megasquirt Version 3
* O2 Simulator
* Polished Compressor Housing
* T-Bolt Clamps
* Autometer Black Face Fuel Pressure Gauge
* Fuel Rail Painted Black

Suspension/Wheels/Brakes:

* Freedom Design Strut Tower Brace
* Prothane Front End Link Bushings
* RotoTech Cross Drilled And Slotted Rotors
* Ti22 Titanium Brake Pads
* Prothane Control Arm Bushings
* Ground Control Coilovers
* Koni Yellows
* 17inch Gunmetallic Rota Boosts
* 225/45/R17 Nitto Neo Gen Tires

Interior:

* Black Sparco Torino 2 Racing Seats
* Custom Seat Brackets
* Sparco 4 Point Harnesses
* RK Sport White Face Gauges
* Short Shifter
* APC Carbon Look Shift Knob
* White Faced HVAC
* White Faced Dimmer Panel
* Autometer Boost Gauge
* Autometer Oil Pressure Gauge
* Custom Fiberglassed Radio Bezel
* Autometer Volt Gauge

Exterior:

* 00+ Toyota Cavalier Tailights
* ViS OEM Carbon Fiber Hood

Audio:

* Alpine CD Player
* Soundstorm 660 4 CH AMP
* 2 12in Rockford Fosgate Hx2's

what are you wanting for the adj. fmu and turbo timer?

Adj Fmu is going for 175. Turbo timer for 100.

I was thinking about doign the 086 head swap on my built motor, but I see you have a port and plished head with ss springs and valves. Couple questions, was the porting done by a machine shop with a flow bench? Do anythign with cams and lifters? Last dreaded question..how much? Also, I will PM you about the heated O2 sensor. Sad to see someone selling this many parts