Hello I have a 99 z 2.4 and I have a enine and harness and computer from a 97 z 2.4 can I make this work in the 99 I see injectors and some sensors are different so doI just change them or do I change the harness and ecm with the engine
Thanks

you just the whole wiring harness in the engine bay its easier...... im sure you know about the bulk head fitting under the brake block. im not sure if the pcm is going to need to be re flashed, i know it does when you switch engine types but im not sure in your case. in your case i would anyway if its a stock 2.4L going in, chevy has updates come out for that thing.

Thanks for the info Can you explain the bulk head fitting under brake block is there a trick to it and what if I use the pcm out of the 98 with the engine.

I have a 99z24 and am running a motor from a 97GAGT. They are essentially the same thing, just use the sensors and the fuel rail from the 99 and you shouldnt have any problems. Ive been using this motor for nearly 4 years with no problems.

"Oil Leak ? What oil Leak ? Oh, Thats Just The Sweat From All The HorsePower!!"