I RACE A DIRT TRACK CAR AND IT SAYS IN THE RULES THAT YOU CANT SWITCH FROM OEM SO IS THERE ANY OEM REPLACMENT HIGH OUTPUT COILS FOR A 2.4L I HAVE SEARCHED ON HERE AND HAVENT FOUND ANYTHING SO ANY HELP WOUD BE APRECIATED
4467_1170664228341_1280054985_30504438_8383986_s.jpg
The short answer is no, there is nothing that is original equipment for the car that is a direct upgrade.
You can swap to coil packs and plug wires from a 2.2 chevy engine, but that is definitely going to get you called out if anyone else in the bunch runs a Quad 4.
there was a fellow making titanium inserts for the boots and coils to give less resistance i dont know if he still has them but this is his screen name, Greg B (jersey devil), message him, i know he had quite a few sets a couple months ago
the tech guys are up on there stuff so they know this motor doesnt run plug wires but thanks for the info
4467_1170664228341_1280054985_30504438_8383986_s.jpg
Lane McClure wrote:there was a fellow making titanium inserts for the boots and coils to give less resistance i dont know if he still has them but this is his screen name, Greg B (jersey devil), message him, i know he had quite a few sets a couple months ago
these are the inserts that are inside the white coil housing that connects the coils to the spark plug boots. They are WAY less resistance than the OEM ones, and look 100% like the OEM ones.
You could also get coils out of a older HO motor, and swap them into the LD9 coil housing.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
where do they sell them at the inserts i mean could you link me to someone i searched that jersey devil and didnt find anything
4467_1170664228341_1280054985_30504438_8383986_s.jpg
how many volts does a stock coil have compared to a ho one
4467_1170664228341_1280054985_30504438_8383986_s.jpg
this is the thread he had started, his screen name is in there, just click it and it will take you to were you can message him
those coils inserts are junk. do nothing
Im a Xbox 360 fanboy...and damn proud of it!!
DO ANY OF YOU KNOW THE VOLTS OF A STOCK COIL TO A HO COIL I CANT FIND IT ANYWHERE AND CALLED THE LOCAL PARTS STORES AND DEALERS
4467_1170664228341_1280054985_30504438_8383986_s.jpg
I have another set laying around somewhere.
PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO
but what voltage are they msd ones for a 2.2 are 45000 what are factory for a 2.4 and a 2.3 ho that is what i want to know
4467_1170664228341_1280054985_30504438_8383986_s.jpg
