Accel mankes one, which is an adjustable FPR. We carry them at www.TurboTechRacing.com
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
I think I just asked Daflyinsquirl this question already but AFPR for an LT1 can fit an ecotec motor I believe? Know where I can find one? When got lucky before and found one for the ECO, it was about $79. Turbotech Racing wants $169.99. It even had a gauge for $79.
"FRIENDS DON'T LET FRIENDS DRIVE STOCK"
as far as I know, the LT1 FPRs only fit the 03-05 rail. 2002 rail is wayyyy different.
But what if i got the hahn racecraft fuel rail adaptor? I think that adaptor fits on all the fuel rails, not sure.
"FRIENDS DON'T LET FRIENDS DRIVE STOCK"
DaFlyinSkwir(LS61) /PJ/ OEM+ wrote:as far as I know, the LT1 FPRs only fit the 03-05 rail. 2002 rail is wayyyy different.
this is correct.
The Corvette one will not work though. F-body unit is direct bolt on for 03-05.
With LSJ injectors and stock FPR, would I be pushing around 40-45 psi to be able to utilize the full 360 cc injectors capacity? Stock fuel pressure may not be enough to get the most out of my injectors with my curren mods; or do I need an AFPR on top of HPT to push even more fuel through? I am almost there with the LE5 mani and re-tune, but is my stock FPR still good enough (until I make more power) to get the full potential out of my LSJ injectors? I want the most power out of this (if it means getting an AFPR I will). Someone can tell me? Thanks!
"FRIENDS DON'T LET FRIENDS DRIVE STOCK"
Anyone? Almost have the mani, need to get this if I need it so I can have and not miss anything when I get re-tuned!
"FRIENDS DON'T LET FRIENDS DRIVE STOCK"