how can I tell - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
how can I tell
Sunday, January 11, 2009 4:26 PM
how can I tell what kind of motor I have in my 99 cav?? I know that its a 2.4L but thats about it?? I want to upgrade it so I can drive in autox




You wanna ride??

Re: how can I tell
Sunday, January 11, 2009 4:28 PM
LD9???? im confused in what ur asking



8 psi with m62 and IAT under 100
Re: how can I tell
Sunday, January 11, 2009 5:19 PM
The LD9 Twin Cam was a 2.4 L (146 cu in) Quad 4 variant with balance shafts, debuting in 1996. Bore was decreased from 92 mm (3.6 in) to 90 mm (3.5 in) and stroke increased from 85 mm (3.3 in) to 94 mm (3.70 in) for better torque, and power was increased to 150 hp (112 kW).[1] This engine received a minor update halfway through the 1999 model year that eliminated the EGR, increased the compression ratio from 9.5:1 to 9.7:1, and switched from low impedance fuel injectors to high impedance.
Re: how can I tell
Sunday, January 11, 2009 7:16 PM
anybody that's anybody in the autoX world will tell you to start off small and learn what you already have.

a lot of the time its not about who has the most power its what driver can make the best use of the car they have.



And I should've been drown in the rivers I've found in token lost...
Re: how can I tell
Monday, January 12, 2009 3:47 AM
ok so I have an LD9 thanks chris and cody thats what I needed to know




You wanna ride??
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search