Ok I finally got the quotes back for these flanges that everyone has been wanting! I would like to do a minimum of 5 at a time to keep the cost down for all of you! Once there are 5 wanted I will need the money to be paid from all 5 buyers before I can start to process all of the orders. I accept pay pal, please PM for more details and information! The buyer will pay shipping (about $5-$10). Im still trying to find time to do the 2.2 and 2200 valve cover spacer (for aftermarket rockers), and the throttle body spacer/flange for the 2200! Any ideas on any other fab parts please PM me! Please start a list in this forum with your name, flange type, material, and email is possible!
Thanks
2200 Intake Manifold Flange
3/8 Aluminum
1x ….. $95
5x ….. $45
10x …..$40
2200 / 2.2 Exhaust Manifold Flange
3/8 Stainless Steel 3/8 Mild Steel
1x ….. $145 1x ….. $130
5x ….. $105 5x ….. $80
10x ….. $100 10x ….. $85
2.4 Exhaust Manifold Flange
3/8 Stainless Steel 3/8 Mild Steel
1x ….. $145 1x ….. $130
5x ….. $105 5x ….. $80
10x ….. $100 10x ….. $85
2.2 Upper Intake Manifold Flange (Material Supplied By Customer)
3/8 Phenolic Resin
1x ….. $100
5x ….. $57
10x …..$42
What grades of aluminum, stainless, and carbon are being used in these quotes?
aluminum - 6061
stainless - 304
mild - A36
is phenolic an option here???
Riddle me this... riddle me that...
Quote:
2.2 Upper Intake Manifold Flange (Material Supplied By Customer)
3/8 Phenolic Resin
1x ….. $100
5x ….. $57
10x …..$42
so the answer to your question is kinda....
Are you trying to get something ELSE made from resin?
2200 Intake Manifold Flange
3/8 Aluminum
1x ….. $95
5x ….. $45
10x …..$40
2200 / 2.2 Exhaust Manifold Flange
3/8 Stainless Steel 3/8 Mild Steel
1x ….. $145 1x ….. $130
5x ….. $105 5x ….. $80
10x ….. $100 10x ….. $85
2.4 Exhaust Manifold Flange
3/8 Stainless Steel 3/8 Mild Steel
1x ….. $145 1x ….. $130
5x ….. $105 5x ….. $80
10x ….. $100 10x ….. $85
2.2 Upper Intake Manifold Flange (Material Supplied By Customer)
3/8 Phenolic Resin
1x ….. $100
5x ….. $57
10x …..$42
id like a stock sized phenolic flange to go in between my head and venom intake manifold for my 2.4, thing is though... i have no idea how to do that and retain the PCV channeling and such thats there...
Riddle me this... riddle me that...
You do realize that will effect the sonic tuning of the manifold, right?
Go beyond the "bolt-on".
well i guess i dont, go ahead and explain it to me.
Riddle me this... riddle me that...
