Wheres the cheapest place to get some arp head studs for the 2200. The only place that I can find that carries them is jbodyperformance, if my memory serves me right I remember that j-tuners use to sell them but now they hardly carry anything.
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
Did you try and contact J tuners? Thats where i got mine from.
Buy them direct from ARP, duh.
fortune cookie say:
better a delay than a disaster.
I dont have the specs for the bolts,
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
WHO DELETED THE STICKY?!?! (stupid mods got no love for the LN2s)
here are the part#s:
For the head studs the final part numbers are:
5 x ATP4.510L M11x1.5 STUD x 4.510"
5 x ATP5.950-1 Custom M11x1.5 STUD
10 x APN12-2 12 Point Nuts
10 x APW1316N Washers
For the Main Studs the Final Part numbers are:
10 x ATP4.400-1LB M11x1.5 & 7/16-20 STUD
10 x APN12-1 7/16-20 12PT Nut
10 x ARW1316 Washer 7/16ID 13/16OD Chamfer
I believe 5 of the headstuds are custom made, but they should still be able to make them for you
fortune cookie say:
better a delay than a disaster.
thanks man
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
well I contacted ARP and they said it could cost up to $1000.
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
It will be about $200. Did you ask for 5 sets?
fortune cookie say:
better a delay than a disaster.
ya, I'm thinkin of just gettin stronger head bolts from flatlander racing
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
No way is it going to cost $1,000 you must have talked to someone that didn't know what you were talking about. Those are regular arp stud part numbers. I ordered two of the shorter ones just last week, and it was like $6 for each one. My point is, it's not going to cost $1,000 and going with anyone other then arp for head bolts is just not wise. They are the best in the business for making strong bolts. So, go with them.
wouldn't you be able to use a different length than the 5.95? something a little bit longer or shorter
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
nvm I just got a hold of arp and they did have those bolts in stock
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
what was the final price for all the stuff?
fortune cookie say:
better a delay than a disaster.
117 plus shipping
<img src="http://ad.nicoclub.com/banners/nico-banner1.gif" ></a>
srry to bring this back from the dead. just want to make sure these are the correct part numbers.
DRIVE HARD OR DONT DRIVE AT ALL!!!
bump
DRIVE HARD OR DONT DRIVE AT ALL!!!
I will verify that tonight. looks correct though.
flatlander / importperformanceparts sell the arp head studs
just make sure on instalation, you leave enought thread for the alternator bracket to mount on the top! do a dry fit before torquing down, make sure the bracket and nut will fit on top of the head studs.
I think it says on there you have to cut them to length. and if you order them from arp then i think there only like 117 vs 230
DRIVE HARD OR DONT DRIVE AT ALL!!!
yes, it is cheaper to get them directly from ARP, so long as you talk to a compitent sales rep.
JBP also sells the studs, but direct is still cheaper.
The alt bracket should not be a huge issue, since most people chop that part off to fit a larger downpipe. You SHOULD have enough to bite the alt braket down with anyways.
What is everyone torquing these to, and with what lube on them?
from what I have read, around 75lbs. and they should come with arp moly lube
DRIVE HARD OR DONT DRIVE AT ALL!!!
tring this again. Making sure these are the correct part numbers for the head studs.
DRIVE HARD OR DONT DRIVE AT ALL!!!
This is what I have...sorry i am to lazy to see if it matches the above....
Main studs:
(8) ATP4.400-1LB
(2) ATP4.650-1LB
(10) APW1316 (washer)
(10) APN12-1 (nut)
Head Studs:
(5) ATP4.650-1lb
(5) ATP5.950-1
(10) APW1316N (washer)
(10) APN12-2 (nut)
well If you look up through the posts you will see that i asked it once but no one answered. but I just dont want to order and then @!#$ be wrong
DRIVE HARD OR DONT DRIVE AT ALL!!!
