Today I got me a 2.25 cat-back to some muff I cant pronounce and I was wondering since the faq didn't specifically specify do I need a resonator?
I like the way it sounds, and it don't rap up.
O and is the IAT relocation worth a Sh!#
You dont NEED a resonator, if you like the way it sounds, thats all that it changes. Pics of the exhaust?
The IAT relocation will make the car "think" the air comming in is colder, and will make it run more rich, not a worthwhile mod IMO. In the end your burning more gas for maybe 1hp? I don't actually know what it would net, but I wouldnt do it.
I know what it does but i didn't know if it was worth it so thanks,how do i add a picture?
the man that did the exhaust said that mine is a limited edition because it took over a hour to bend it over the rear axle (end of a Friday!) but he finally got it.
how do i add a picture?
tyler durden wrote:I know what it does but i didn't know if it was worth it so thanks,how do i add a picture?
the man that did the exhaust said that mine is a limited edition because it took over a hour to bend it over the rear axle (end of a Friday!) but he finally got it.
how do i add a picture?
Go to an image hosting site like
http://imagshack.us and upload a pic then it gives you a link thing to copy and paste in here.
98 Trans Am
6.0, L92 heads, LS3 intake, TSP 231/236 cam, and much more
Thanks im going to take pics real fast!!!!!
C:\Documents and Settings\Heather\My Documents\My Pictures\cavalierwet\cavalierwet 107.jpg
I cant figure it out and i just got some good pics!!!!!help!!!
email me the pics at tspence@monm.edu and I'll see if I can get them posted.
98 Trans Am
6.0, L92 heads, LS3 intake, TSP 231/236 cam, and much more
My email is screwed.
see if that works, I am computer illiterate
No it didn't work. So how much did it cost you to get the exhaust done anways?
98 Trans Am
6.0, L92 heads, LS3 intake, TSP 231/236 cam, and much more
$135 but its not mandrel bends, I tried to get a car domain and its dicking me around to.
Got my email to work the pics are coming your way
thanks
Here's the first one just to make sure it worked.
98 Trans Am
6.0, L92 heads, LS3 intake, TSP 231/236 cam, and much more
Just click on the thumbnail and it should bring up a big picture.
Alright, there ya go.
98 Trans Am
6.0, L92 heads, LS3 intake, TSP 231/236 cam, and much more
yep! looks like a fence post! lol
I've been told that a guy around here can bend some 2.5" piping from header-back for only $40 as long as you supply the muffler. And I already have one that I bought off a friend for really cheap so hopefully sometime I'll go check it out and see if it's really that cheap. Atleast that's all the guy charged my friend for doing it on his Honda.
98 Trans Am
6.0, L92 heads, LS3 intake, TSP 231/236 cam, and much more
You cant even get a pipe put on for under $60 around here
Nitrous is like viagra too much and you can blow that baby up!
Yeah, if I can get it for $40 or anything below $100, I'm gonna do it. Right now, I'm just working on modding my car since I lost my license for a while due to stupidity on my part. So I've got all this time and I figure I might as well do some mods while I can't drive it anyways. I plan on doing quite a bit to it, for me atleast since I haven't put any mods into a car before. I'm working on getting secret cams, ported tb, header, intake, u/d pullies, short throw shifter, and full exhaust done hopefully by the time I get my license back.
98 Trans Am
6.0, L92 heads, LS3 intake, TSP 231/236 cam, and much more
If you like the car do it their fun and easy to drive not a cop catcher to, not to mention good on gas.
Nitrous is like viagra too much and you can blow that baby up!
Yeah I love the car but I was thinking of stepping up to an LT1 T/A 6speed or a 97+ Grand Prix GTP. But no one's really showed interest in buying my Z24 so I might as well keep it and do some mods.
98 Trans Am
6.0, L92 heads, LS3 intake, TSP 231/236 cam, and much more
