where can I get 10 gauge/0.134inch pipe - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
where can I get 10 gauge/0.134inch pipe
Sunday, September 10, 2006 9:33 AM
I went to home depot and lowes and all I could find was 16 and 18 guage steel pipe. I am lookin for 10 guage for a roll cage. I looked on summit and jegs and all they had was some roll cage kits. I don't want a whole kit. I just want a 1 5/8inch 10 gauge pipe thats 5 foot long. 10 gauge sheets would be nice too, tho I think lowes has those. Oh and 10 gauge translates into .134 inch which is also 67/500 inch but thats irrelivant, its also 3.4163mm if that helps at all. Maybe 12 gauge?



Scott

When I boost, you boost, we boost
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You have been banned from NEJBODY.
You've displayed wayyy too many acts of pushing people to their limits.
It's never cool to tear people down for what they want to do.
NEJBODY is a team. We're not the same as JBO where everyone bashes on eachother.
I'm surprised you show up to our meets after half of the things you say on here.

Re: where can I get 10 gauge/0.134inch pipe
Sunday, September 10, 2006 11:38 AM
Why do you only want a 5ft pipe? It's gonna take more than that to make a real 6 or 8 point cage easily. I got my kit from S&W Racecars for around $200 and only had to make a few small modifications to it.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: where can I get 10 gauge/0.134inch pipe
Sunday, September 10, 2006 3:26 PM
Dude, u r so funny. Did I or did I not say that I just don't want a whole kit. I don't need a whole kit there is no point to a whole kit, if I was runnin 10s that would b a good idea but until that day I don't want a whole kit. So with that being said, I just want one five foot 1 5/8 inch 10 gauge pipe, where can I get one? S&W have a website?



Scott

When I boost, you boost, we boost
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You have been banned from NEJBODY.
You've displayed wayyy too many acts of pushing people to their limits.
It's never cool to tear people down for what they want to do.
NEJBODY is a team. We're not the same as JBO where everyone bashes on eachother.
I'm surprised you show up to our meets after half of the things you say on here.
Re: where can I get 10 gauge/0.134inch pipe
Sunday, September 10, 2006 3:54 PM
RaGiN Z (the fake 05) wrote:Dude, u r so funny. Did I or did I not say that I just don't want a whole kit. I don't need a whole kit there is no point to a whole kit, if I was runnin 10s that would b a good idea but until that day I don't want a whole kit. So with that being said, I just want one five foot 1 5/8 inch 10 gauge pipe, where can I get one? S&W have a website?


Wow you get butt hurt real fast. Let us review.

1) You say you want piping for a rollcage yet you don't want to buy a kit, and you only want 5ft of piping.
2) I reply with, "It's gonna take more than 5ft to make a rollcage." A rollcage, by definition is either 4,6,8,10 or 12 mounting points. It will take almost 5ft just to make the main hoop of a cage, meaning 2 points.
3) This being said I suggest just buying a kit to save time and money. Install what you want and/or need and save the rest for later, like I'm doing.
4) You get all butt hurt because I made a suggestion that went against what you wanted to hear.
5) You still ask for help from me after being an ass.
6) You can find their site on your own. There's this site, that funny people like me love, called Google. Might wanna try it.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: where can I get 10 gauge/0.134inch pipe
Sunday, September 10, 2006 4:10 PM
Listen dude, I was tryin 2 b nice 2 u cause u replied to my post with a suggestion. U don't even kno what it is that I have! I only need 5 foot of pipe, that's it, end of story. If I needed more than that, I would have just ordered the jegs kit without question. There is no way in hell 5 foot would even be remotely enuf to make the hoop. The only reason why I asked for their website is because I wasn't sure if they even were on the web. Who's to say they did! I kno of a bunch of performance places that aren't on the web. If u really want me to be a dick I could get real dirty but what's the point? To make false promises of coming to your house and get physical? Cmon, seriously.

Honestly, I defended u when u had ur sunbird and people were bitchin about u gettin sponsored. We actually hung out at the 03 bash, as drunk as we were u even humped my leg. The next morning u even gave me tylenol for my headache. U get this new car read a couple things and now u think u kno everything and u act like njhk and even he wonders why people bitch when he posts. Consider this my apology or whatever but thanks for the tylenol.

Love always,



Scott

When I boost, you boost, we boost
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You have been banned from NEJBODY.
You've displayed wayyy too many acts of pushing people to their limits.
It's never cool to tear people down for what they want to do.
NEJBODY is a team. We're not the same as JBO where everyone bashes on eachother.
I'm surprised you show up to our meets after half of the things you say on here.
Re: where can I get 10 gauge/0.134inch pipe
Sunday, September 10, 2006 6:07 PM










Re: where can I get 10 gauge/0.134inch pipe
Sunday, September 10, 2006 6:28 PM
Kardain wrote:


^^^ best image ever (I applaud you)


200 wheelhorse or bust
Re: where can I get 10 gauge/0.134inch pipe
Sunday, September 10, 2006 6:31 PM
And this is why I love the jbo... Hahahahaha! That was good! Funny, I felt like it was a hallmark moment after I wrote that too.



Scott

When I boost, you boost, we boost
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You have been banned from NEJBODY.
You've displayed wayyy too many acts of pushing people to their limits.
It's never cool to tear people down for what they want to do.
NEJBODY is a team. We're not the same as JBO where everyone bashes on eachother.
I'm surprised you show up to our meets after half of the things you say on here.
Re: where can I get 10 gauge/0.134inch pipe
Monday, September 11, 2006 8:23 AM
www.McMaster.com

Your pipe should be somewhere on that site, they ship for cheap too.


-Aaron
www.TurboTechRacing.com

Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search