Ok so ive been looking on ebay latly and i found that you can get a universal intercooler pipe kit (3 inch) for like $100 to $135. Im going to buy one and make a crazy custom CAI for the cavy. They come with all the bends and strait pipe and connectors you need.
http://www.cardomain.com/ride/2090440
Just thought ppl would like to know.
http://www.cardomain.com/ride/2090440
universal means its doesn't fit anything
Why not just go to an exhaust shop and have them bend you one for $25 or so?
Where do you plan on routing it? Your roof? No, but seriously... With your stated mods, you should already know that more bends in the intake piping is only going to restrict more air flow. The only reason turbo guys/gals run more piping is to be able to route an intercooler to decrease the temperature of the air that the turbo heats up (same thing for superchargers). Otherwise, they would run the piping straight to the manifold. But, I'm sure you already know that.
You, being a nitrous guy, don't need to go radical on the piping...Either route it behind the battery or in the wheel well.
If you really wanted to make a "crazy custom CAI", just cut a hole in your hood and slap an HKS filter to the end of your throttle body (SNORKEL STYLE BABY). That is about the coldest air intake you could possibly get. Later
Brian
The coldest air would be a bottom breather, like SLP used to sell for the F-bodies. Just be careful not to hydrolock it.
Yea i was just putting this out there for people that wanted to go crazy with custom intakes... also you could make some for other cars with this kit because theres enough pipe to do other custom ones!
http://www.cardomain.com/ride/2090440