I'm in the market for a new fuel rail and came across this on eBay - never heard of it before...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4645696929&fromMakeTrack=true

My question is whether anyone has installed this and also if it can be used with the stock injectors and regulator.

I really only want it for cosmetic value - buying a new stock one and getting it polished will cost about the same money...not really worried about any performance gain quite yet.

Any info helps - thanks!

Steve

For that price it might even be worth buying. LOL.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26

something made by venow worth buying



------------------------------------------------------------------
------------------------------------------------------------------
when you beat someone in a civic people wine and make excuses
when you beat someone in a cavalier they pull over and check under thier hoods

why not get a good used stock from ebay or a wrecking yard , and polishing it that way ??

ive never seen the eco venom rail

ive got the venom rail on my 2.4 because it was easier to drill and tap than my stock 1 , and that is the only reason i got it

NUTCASE . wrote:something made by venow worth buying

are they a bad company? or just usually expensive... i was about to post this same question...

expensive example:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=133204&item=4645673142



|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|

only downside to that is that you need to hack up your fuel lines cause everything needs to be converted to AN stuff



1989 Turbo Trans Am #82, 2007 Cobalt SS G85

Acer wrote:

NUTCASE . wrote:something made by venow worth buying

are they a bad company? or just usually expensive... i was about to post this same question...

expensive example:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=133204&item=4645673142

there are people on here that have made thier own manifold for a fraction that cost. besides the fact I have NEVER heard of paying $1300 for an intake mani on ANY car.



------------------------------------------------------------------
------------------------------------------------------------------
when you beat someone in a civic people wine and make excuses
when you beat someone in a cavalier they pull over and check under thier hoods

Rodimus Prime wrote:only downside to that is that you need to hack up your fuel lines cause everything needs to be converted to AN stuff

IMO thats what makes it worth the buy. SS lines WOOOT


"boobs now with Riboflabin"