i was curious if a shop could bend up some 2.25" exhaust, without having my car there. (bodykit and all...nobody puts it on a lift cept me and one of the techs at my job), plus this way i can install and weld it at my shop myself and save the money. the guys at my shop were pretty sure they would need to have my car up on a lift to see the bends, but i figger if they can get stock catback exhaust, why cant they duplicate it with 2.25" instead of 2"? is this possible?


_________________________________________________________________

this useless post brought to you by the alcoholic known as LUNDiS

Mr. Goodwrench did that for his car, pulled the stock exhaust off then copied it using 2.5 I think.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Just ask the shop if you can put it on the lift and see if they will just fab it up. Then let you take it to install just like a premade kit. Either try that or just give them the stock exhaust like you originally thought.


2012 HD VRSCF
2010 Ford Explorer
2006 Ford Ranger
2004 Chevy Cavalier

get exhaust pipe from summit racing. Search summitracing.com its cheap


02 LS Sport http://www.cardomain.com/ride/2135396
68 Firebird http://www.cardomain.com/ride/2135556
56 GMC http://www.cardomain.com/ride/2135587
66 Suburban http://www.cardomain.com/ride/2135589

I did mine on jackstands, whish I had a lift to use. I only used a J-bend and a U-bend, all the rest of the system was a 35"X2 1/4" Thrush Glasspack and a Dynomax Ultr-Flo muffler.

Anyways, I got mine from Summit Racing, but Jeg's also carries tubimg, to include stainless steel.