Has anybody heard of these? or had experience with them?.. They said its for the 2.4 application.. Here at Summit Racing. I have the Clevite Rod and Main Bearings so thats why im looking at these.
http://store.summitracing.com/default.asp?target=eadvsearch.asp&SearchType=Make
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
find the page again man, didnt show up thanks to the frames on the summit racing site, find the lifters and right click on the link and go to properties and paste it to us (in internet explorer, in firefox just right click and copy link location)
My bad^^^ Hold on one sec
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Dammit, it isnt working for me..
but here is the part# CLE-213-1765 Paste that into the search bar on summit. Sorry about that lol
http://www.summitracing.com/
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
Use them, you will like them... no issues so far from using them.....
clevite is 1 of the top names for parts for motors
their quaility is equal to or higher than oem
Thanks guys, that's what I thought.. Honestly I've just never heard anybody here on the org talk about Clevite LIFTERS, just the rod and main bearings..
Karo, do you sell these? lol
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Mmmm I think I have like 10 in stock? Not sure... I would need to double check what I have out back....
Thanks, lemme know if you could.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
What about the roller lifters they showed for the 2.4, I thought these engines had flat tappet cams. Does someone make hyd roller cams for the 2.4?
2000 Z24 5spd header & catback for now.
WHITECAVY wrote:Thanks guys, that's what I thought.. Honestly I've just never heard anybody here on the org talk about Clevite LIFTERS, just the rod and main bearings..
Karo, do you sell these? lol
damn david, hey if you get em from karo lemme know how much they were
2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |
Hey i got them for my 97 2.2 quite expensive i think i paid 145 for the set. they look a little more beefed up then the stockers.
http://www.cardomain.com/ride/2090440
Will do Mat.
Nate, yea I think ill be paying way more than that since I need 16 of them unfortunately. Where did you get yours.?
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
WHITECAVY wrote:Will do Mat.
Nate, yea I think ill be paying way more than that since I need 16 of them unfortunately. Where did you get yours.?
You guys realize you use two totally different types of lifters right?
fortune cookie say:
better a delay than a disaster.
OHV notec wrote:WHITECAVY wrote:Will do Mat.
Nate, yea I think ill be paying way more than that since I need 16 of them unfortunately. Where did you get yours.?
You guys realize you use two totally different types of lifters right?
Ummm yessss lol, I only asked because maybe the same place he got his that they might have them for the 2.4 as well
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
i got mine from NAPA
http://www.cardomain.com/ride/2090440
^^ Thanks
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
i need a set of those for sure
I just called NAPA for a set for my 2.4.. Umm yeah for 16 of them im looking at $244.00!!
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
this might be the single most stupidest question but could someone pronounce Clevite for me (spell it out)? Im getting ready to start buying my parts and I don't want to sound too dumb, thanks.
View my MySpace
haha i dont even know how its pronounced haha... i just say " you guys got that brand that starts with a c "? lol
http://www.cardomain.com/ride/2090440
Lol, its pronounced CLEEEEEE(as in bee) VIIIIIIITEEEE(as in kite) The napa guy told me because I was saying it wrong haha.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
well I don't feel as dumb now thanks. I was saying clay (like molding clay) vette (like a corvette) Thanks guys.
View my MySpace
