attn EVENT, exhaust config - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
attn EVENT, exhaust config
Friday, October 14, 2005 4:38 PM
jus have a question for event, u posted this in another post


30 inch resonator, header, on top of another muffler, and then yet another 20 inch resonator...

wut does ur set up look like? how did u make it fit and do u have next to no piping? ur exhaust must be low and mellow as all hell

thanks man


____________________________________________________________________


Re: attn EVENT, exhaust config
Friday, October 14, 2005 4:51 PM
yeah how


---


Re: attn EVENT, exhaust config
Friday, October 14, 2005 5:00 PM
I will say this he has a 2.2 so his header is comin from the front so there a little more space. On the 2.4 i have a header and Cat and a 29: resonator was a really tight fit on my car. Then to a muffler.


2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time


Re: attn EVENT, exhaust config
Friday, October 14, 2005 5:10 PM
forgot bout the 2.2, lil more space, but still, wut hes got jus seems to long to have actually have a pipe in there


____________________________________________________________________

Re: attn EVENT, exhaust config
Friday, October 14, 2005 6:21 PM
I've seen pics of his exhaust configuration. His exhaust exits at the passenger side of his bumper, so that probably how got it all to fit under there.


Re: attn EVENT, exhaust config
Friday, October 14, 2005 6:36 PM
so im guessing that 20 inch resonator must be running along the rear axel, wouldnt all that bending and muffler slow the flow rite down? still jus waiting till he sees this


____________________________________________________________________

Re: attn EVENT, exhaust config
Friday, October 14, 2005 9:18 PM
This is Events set up.

He has the 2.2L non-ecotec engine it goes since last I seen him.........

Pacesetter header, 30 inch Magnaflow XL resonator, piping, magnaflow 14" long 4" case muffler, piping to another magnaflow 14" long 4" case muffler piping ot a 3.5" tipe exiting out of the rear bumper passenger side.

At least i think they're 14". Don't see as long as an 18" not much room under there.

Now,
I'm heading over ot the store tonight, and I 'could' take a peek under his car.
i 'could' do that.


-M


Remember....syringes go in the RED waste basket.
Re: attn EVENT, exhaust config
Friday, October 14, 2005 11:50 PM
Is all that hurting performance? I'm sure it sounds really good, but at what sacrifice to power?





Re: attn EVENT, exhaust config
Saturday, October 15, 2005 12:12 AM
resonators don't hurt performance, it's like a normal pipe, except that it change the sound





Re: attn EVENT, exhaust config
Saturday, October 15, 2005 3:44 PM
thanks guys, cant believe he has all those mufflers and resonators
Re: attn EVENT, exhaust config
Sunday, October 16, 2005 6:02 PM
I want to hear a sound clip? Is there a sound clip i can hear?


---



Re: attn EVENT, exhaust config
Sunday, October 16, 2005 8:08 PM
Hehe, yeah he got them all to fit under there.

But remember, now, with all that though, his car is quiet.
Deep tone n all.
But quiet. Very quiet. (almost quieter than stock at idle?)
So for a sound clip, think deeper sounding stock.
Just not constrictive as stock.

His car is registered in DC, and they are pretty strict about a LOT if not everything auto related.. So if he can pass inspection and emmission and blah blah then something is going right for the set up.

-M


Remember....syringes go in the RED waste basket.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search