Well, my current muffler is broke (big chunk missing out of the side where a mount was welded to it).
I want to switch to something thats very low profile (as opposed to my current one).
What would provide better fitment:
With a 7" long tip
or
With a 4" long tip.
Thanks for the input.
Either muffler will fit fine. Even if you had a slight problem as far your fitment, an good exhaust shop can make it fit properly. I personally have a magnaflow muffler and tip setup with a body kit and they fit that thing nicely.
www.kronosperformance.com / 732-742-8837
depends on how far they mount it in or out away from the axle... custom job = custom fit of custom parts
I'm thinking the 7" one since I can inset the muffler farther. I don't want that big flashy SS thing in plain view.
Zach wrote:I'm thinking the 7" one since I can inset the muffler farther. I don't want that big flashy SS thing in plain view.
Either Or, the welder can even cut back the piping if it sticks out a bit too much. The welder can put it to your liking.
www.kronosperformance.com / 732-742-8837
Go for the 7" one, if you set it right you'll only see the tip which always looks nice.
