I get all the screws off fine untl i reach the lsat two 13 mm motor mount bolts, ive jacked up the engine and they still wont come loose, ive tried liquid wrench to loosen it up and still no avail.... is there any way i can get this stupid thing out to insert the new one in
gotta kinda be rough with the old rubber in there. I used a screwdriver to pry it out, didn't hurt anything. I'd be careful.
i meant the last two BOLTS 13mm or 1/2 socket to get the bolts that hold the old mount in place... I jacked up the engine to get it a little leway, still these two bolts wont budge...
torque wrench with a pipe..its your best friend..i used one of those longggg wrenches that have a swivel end..made it easy
"Freedom 'ought to have its limits"-George W. Bush may 31 1999 (who voted for this idiot?)
breaker bar and a pipe.
ecopower
yea, i used a little longer bar to gain some torque on it, with about 10 mins of hard pulling both finally came loose
wooo thanks for the help
