I am putting back together my 2.2 from blowing it up again and I wanted to drop the compression some and also hopefully find a reusable Headgasket. any one have any sites or anyone selling a thicker one. Also looking for aftermarket rockers and lifters. If anyone could tell me any injector upgrades for around 250hp . also how do you guys idle bigger ones. thanks
matt
You won't find injectors, there are no aftmarket injectors to support that much HP with that injector design. Your only bet is to go with an EIC from like Simple Digital Systems (www.sdsefi.com). For head gaskets, you can have Cometic custom make you one. Just send them an e-mail. For rockers, you can use the Comp Cams 1414-xx rocker set. It's cheaper to purchase the set of 12 from Summit Racing, which will include the pivot balls and top nuts. You will need the rocker studs from an 89 Celebrity with the 2.6 V6. I believe the GM part number is 476530.
I was a retard, and now I'm permanently banned.
Unfortunately Cometic will not even think about designing one without first having 50 orders. They also need a donor block and head to make it.
I believe j-tuners is in the process of having these made, but have yet found anyone to donate a block and head to cometic.
I emailed them, and they were very uninterested in making 1 head gasket.
Best bet is to wait for j-tuners to release theirs. I keep asking them about once a month and still nothing
I sent Cometic a request one time and they e-mailed me back that for $83 they would make one if I gave them the dimensions. No kidding.
I was a retard, and now I'm permanently banned.
What is there website or phon numbers. and is there any other people that even make thicker ones for the 2.2's thanks again
matt
MAtt Lipford wrote:I am putting back together my 2.2 from blowing it up again and I wanted to drop the compression some and also hopefully find a reusable Headgasket. any one have any sites or anyone selling a thicker one. Also looking for aftermarket rockers and lifters. If anyone could tell me any injector upgrades for around 250hp . also how do you guys idle bigger ones. thanks
matt
rockers howell automotive.com
injectors, rc engineering -----rceng.com
headgasket, until someone makes a MLS... headgaskets from felpro are low priced, or you can get a copper one and oring the block. you can also get em in different thicknesses... alot of these places are listed in the FAQ at the top of the forum
O-ringing it would be way too expensive. I hear Jtuners may be working on getting some MLS gaskets out for us soon.
I was a retard, and now I'm permanently banned.
