i just red twice whats in the library and i dont get why i would need a new relay !
is there another way to do it with no relay, i need to do it for tomorow,going on a 2 hour trip on a mountain road
I think my stock fan relay isnt working so good!
You could use really heavy gauge wire and a big honkin' switch...
I used a diode to switch the stock relay without the BCM seeing it... just a 4005 diode to isolate it.
<a href="http://www.lenkorules.com/"><img src="http://s93165229.onlinehome.us/images/zm/sig/LRDCsig3.jpg"></a>
i usually wire the switch up to the stock relay , and isolate both wire with diodes , i tap the stock wire from the computer that triggers the stock relay
but if your stock relay is bad , then you should replace it right away
well i dunno if its bad, just never seen or heard the fan working!
if your a/c is on is the fan on ??
thats the easiest way to know if its working
hmmm ill check tomorow
lol ive never used the A/C its too much of a gas guzzler
