couple quick TB questions - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
couple quick TB questions
Friday, April 08, 2005 3:07 AM
i picked up a throttle body the other day at the junk yard $20, that i planned on using as a core charge when i order an RSM 59 or 62mm. i measured the tb with a dial caliper and it is a 56mm. stock on a 2002 z24 is 52mm right? if so i may throw this one on till i get the even bigger one.. im not sure of the year of the donor car but i do have the VIN (1G2NE1432PM577394) im guessing it was mid 90s-(pontiac grand am) the strut tower says it is a 2.3L. all of the plugs and fittings look the same just wondering if its plug-n-play or not? should i try to switch over the sensors from my car? really dont want to risk breakn em. any help will be appreciated....Patrick




Re: couple quick TB questions
Friday, April 08, 2005 4:10 AM
You got the 2.3 throttle body, its almost plug and play, you need to use the 2.4 sensors, there is a write up on http://www.ny-jbodies.org/library/library.asp under the ho manifold install, just you are putting it on the stock one not the ho one.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search