I was just wondering if people had a wide spread type of chain that can do mandrel bends, i called a couple places today and they said it will have kinks in it, just wondering if anyone knew a place that normally can.
just get pacesetters system for 210 and cut the muffler off, use your own.
---
for our cars, actual mandrel bends and regular bends are not going to produce much of a difference. especially if you're only going with 2.25 - 2.5" piping on an NA engine. i'd just take your pick of any exhaust shop and have them bend one up for you.
red4 wrote:for our cars, actual mandrel bends and regular bends are not going to produce much of a difference. especially if you're only going with 2.25 - 2.5" piping on an NA engine. i'd just take your pick of any exhaust shop and have them bend one up for you.
actually it should
that way there are no high pressure points and the 2.25" should do wonders
email us we have a lot of mandrel bends, in many diameters.
-Aaron
www.TurboTechRacing.com
Performance Parts For Cavalier, Sunfire, Cobalts and More!!!
