Well, another one with harness swap issues.. Swapped a 97 harness into my 96 cavi.. Now it wont CRANK. Acts almost like the clutch safety switch isn't working; just wont crank the motor. I did jump the starter and it fired right up, ran for a couple seconds, and died. Obviously thought I was stealing it. So I did the relearn. It still wont crank. Any suggestions? It ran yesterday with the 96 harness, no problems. I did switch the 96 starter relay into the 97 harness and checked all the fuses. I still need the 97 oil pressure sender, but it ran without that. Anyone know why it wont crank? Thanks

Correction: The subject is wrong; its not a 98 harness, it is a 97. Thx