i took my ac off and now my heat doesnt work and it sux cause i live in indiana now y is this cause every other car owner other then a cavy takes there ac off and there heat still works mine doesnt. someone help me out




13.1 @ 115

what exactly did you do to "take your ac off"? Does the blower work at all, does it blow cold, does it blow warmish, does it not blow at all but at highway speed warm air comes in at your feet?

yea it doesnt blow at all but when im on the highway it all works fine




13.1 @ 115

No blower speeds at all I am assuming, check your fuses, may have one blown, because it sounds to me like the blower motor isn't working. If the fuses are good, you may have disconnected something you shouldn't have. What all did you do to remove the AC in your car? Did you just pull the AC relay, or did you remove the compressor and put an AC eliminator pulley in it? Did you do anything else besides that?

no i havent bought the ac eliminator pulley yet i cant find one other than mantapart and im sure as hell no ordering from them. i pulled all the ines in the engine bay nad pulled the i cant remember wat its call the thing behind the radiator




13.1 @ 115

why did you remove the AC?

Robby002 wrote:why did you remove the AC?

\
he must not go 2 the drag strip




13.1 @ 115

For heat blower fan not working - check the "Sticky: The "Help! I have no heat!" post " at the top of the Maintenance Forum.

Michael Barr wrote:

Robby002 wrote:why did you remove the AC?

\
he must not go 2 the drag strip

I may be wrong, but the A/C compressor only runs when its turned on, otherwise the pulley freewheels. So unless you race down the strip with the A/C on, I don't see how it could slow you down. But then again, the weight of all the parts WOULD, so yea, I see your point as well.
I second the post from Mike.

Might as well take them off, Cav AC doesn't work when the cars get a few miles on them. Wonder why that is?

because the system would get a leak, the compressor starts going bad or needs more oil, or the system might need more freon or----- ALL @ ONCE!

i have the exact same problem all the fuses and relays are fine, the blower motor is good and the resister is good . any one have any other ideas?