The check engine light came on Sunday night before I went to work.
And hasn't gone off yet.
I did some work under the dash.. but wasn't touching any of the wiring.
But it was running fine all day.. and I @!#$ it off for about 6 or so hours and then had to leave for work.
PO113
IAT Sensor 1
Circuit High Input
PO335
Crankshaft Position
Sensor A
Circuit Malfunction
PO440
EVAP Emissions
Control System
Malfunction
*The PO440 code came up twice.*
I think I know why the IAT is sending a code..
But I don't know what the other ones are for.
I really don't want to take it to a shop unless its serious..
The engine runs fine.. no knocking.. no loss of power or anything.
No puddles under the car.. fluids are all fine.
I know the dealership said my left and right axels were leaking transmission fluid,
But they said it would be months before it drained to a dangerous level.
But it never sent a code for that.
It just came on last night when I left my house to go to work.
And is still there.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
Hmm.. I also changed my factory sparkplugs(just had a new engine put in) with Autolites 104s.
But it all went it fine, and the wires are connected. Idk
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
