I removed my fog lights to do some wire clean up and some other things , after re taping all the wires for the fog lights I plugged them and tested them and they work fine but as soon as I go to screw them back into the brackets on the bumper the spark and pop a fuse I have went through 5 fuses trying to solve this matter but everytime I go to screw the fog lights back into the brackets they spark and pop a fuse PLEASE SOMEONE HELP ME!!!

I guess that what is cauising it must be that you switched the wires and now you have the positive connected to ground so when you touch the bracket of the fog light with the metal part where it is to be attached in the car it short circuits and blows the fuse, not sure though... it could be on just one fog light or both so I would disconect one and try with the other switching the wires.

haha your right thank you

double posting is the devil



My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again