hey guys im new to the jbody site but i been doing some searching trying to find out what going on with my car it does the familiar clicking when you start it and take the ebrake off when the drl are supposed to come on, the difference between this and what the other searches say is my car the drl dont work and neither does the high beam on the passenger side low beams work fine. the bulbs look perfect and i put new bulbs in anyway, can someone help me out with wwhats going on.
service light and clicking of the relay and drl light
drl dont work , low beams do, high beam on passenger side doesnt.
I think DRL relay is burntout, Needs replacing.
The DRL runs the Hi beams in series, instead of parallel. this gives the half brite feature of hi beams for DRL's. This if there is a problem with either of the hi beams, the DRL's become inop. The flashing DRL indicator, is the indication of a problem in the system. Since you indicate you have already tried a new bulb, the next most likely cause is a bad wire (power or ground) for the inop hi beam. Grounds on this car is most suspect - Could be corroded.
the fuses are all good im going to check for corroded grounds and wires that what my bud a gm tech told me to check out thanks a lot guys i appreciate it fellas
i have a problem like that. thing is though mine dont flash but i have an inop drl on the pass side and the high beam indicator stays on all the time once i hit the brights once and as soon as i do the service light comes on too.
