The photos from old posts are gone. Can somebody please repost them so I can see what rivets everyone is saying to gring off
Thanks
hopefully this is a little helpful.
link
gotta love autozone!
Scott
When I boost, you boost, we boost
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You have been banned from NEJBODY.
You've displayed wayyy too many acts of pushing people to their limits.
It's never cool to tear people down for what they want to do.
NEJBODY is a team. We're not the same as JBO where everyone bashes on eachother.
I'm surprised you show up to our meets after half of the things you say on here.
Did the job, what a PITA. Went through 4 boxes and three different Pep Boys locations before I found one with all the parts in the box. In addition to drilling out the regulator/motor rivets you also need to drill out 4 rivets that connect the motor to the regulator (screws to reattach to the regulator were provided as were 4 of 5 screws to reattach to the door. The bracket in you see in the picture on the part web sites was not used.
Caution !!! If you buy the Dorman part the bracket to attach the motor to the door is made backwards. Dorman knows of the problem and is working on it. there advise was to bend the supplied bracket to fit.
