I removed the two clips that are attached to the wheel studs, but i can't get the drum off. I have pried and hit it with a hammer and nothing is makeing it budge. The E-brake is NOT on. am i missing somthing here?
Best Time 15.917 at 86.86MPH
nevermind I searched and found that you have to just beat the @!#$ out of it. I finally got it off.
Best Time 15.917 at 86.86MPH
yep..you can never have a big enough hammer LOL
------------------------------------------------------------
Bagger Vance wrote:Just bash the living @!#$ out of it.
1989 Z24 Convertible - Dust Covered
2006 tC - Dust Covered, but driven more
You can also try backing the adjusters off with a small flat screwdriver. The brake shoes can wear into the drum enough that they catch on the back edge preventing removal, in which case you need to back the adjusters off.
if you have a big pulley puller you can put that on it i did it on mine and a couple friend's cars when beating it just seemed to take forever this worked in no time!
I used a generous amount of PB Blaster then hammered the daylights out of it while rotating the drum.
