I took out my a/c and am running a 350k5 belt,it ts pretty tight with using the tensioner pulley and now all of a sudden it is starting to squeal here and there,usually when I'm at a light and start to acclerate.Any ideas/advice??/ I tried all belts from a 335 to 365 and 350 seems to be the only one that fits.



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

I need help please!!Anyone?I don't want this belt to snap



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

Is the belt to tight?

A squeal is not always just the belt.

Eariler this week this ford Ranger I had to fix needed a belt, idler pulley and alternator all to stop the squeal, alternator bad bearing, idler pulley had play




- 2004 Cavalier - 124k, owned since new

I think it might be a little tight.With the stock setup(a/c compressor)and the stock 375k5 belt I never had any squeal but after trying numerous belts the only one that seemed to fit was the 350k5 with using the tensioner pulley,I did however try to use this belt without the tensioner and it seemed a little loose and with trying the 355k5 it was too loose with and without the tensioner pulley so I kinda wish I would have bought the bypass but I think I'll try running this 350 belt without the tensioner.



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

bought and appiled belt dressing spray and helped a little but didnt fix the problem,this SUX



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"