I just put my Drift front on my 98 cav z24 and there are no cutouts for the lower p-light/turn signals so i took the bulbs out and now the turn signals flash rapidly and the turn signal arrows stay solid on my cluster,can i cut the wires and fix it that way or just put the bulbs back in and tuck everything?



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

Turn signal are important as safety . I would find a way to keep them maybe drilling a new hole in other lamp to get the bulbs in.

i tucked mine into the tubing on the front there in there but they dont hurt anything and there not visible

yeah i have the turn signal that's on the headlight corner and that's good enough,one bulb is out,hence the problems stated above



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"

Well alot of people have used integra front turns in the drift cut outs..they fit fine..takes a bit of playing around but it looks good in the end...if you need some i have some brand new ones as well...if thats not the issue i just took and zip tied my harness up to the fender bracket and left the bulb in..problem solved..phil

yes you can use integra or accord lights. when i had my drift front, i taped off the bulbs and zip tied them behind the bumper so you couldnt see it. if you want you could just zip tie it behnd and not tape it, then when you use your turn signal, it will give a glowing effect from that area.

thanks guys for the info,i've got some good ideas now



15.2@89mph 2.171 60ft. 9.830 1/8 R.I.P. "LULU"