removing - oil filter - Maintenance and Repair Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
removing - oil filter
Thursday, September 28, 2006 11:24 AM
I have a 95 cav with a 2.2 changing the filters since I just got the car, is there any trick to removing the oil filter Thanks

Re: removing - oil filter
Thursday, September 28, 2006 12:03 PM
Either from passenger side, between engine and firewall, or from underneath. Drape a piece of tin foil over the exhaust pipe that runs below the oil filter to keep oil off of it, avoiding the smell of it burning when next you run the engine.
Re: removing - oil filter
Friday, September 29, 2006 9:19 PM
DartBaron wrote:Either from passenger side, between engine and firewall, or from underneath. Drape a piece of tin foil over the exhaust pipe that runs below the oil filter to keep oil off of it, avoiding the smell of it burning when next you run the engine.


Definitely do the second part. That smell lasts for 2 months usually. I usually do it by jacking up the right tire and bring it through there. What a pain... Still better than Wal-Mart screwing it up.


2002 Pontiac Sunfire SE
2.2L Auto, Bone Stock
Re: removing - oil filter
Sunday, October 01, 2006 4:06 PM
Thanks for the advice had to get a cup type filter wrench and remove it from the top seems to be the easiest way
Re: removing - oil filter
Sunday, October 01, 2006 6:44 PM
Cup type?!?! Well, as long as it works for you. Strap-type works for me, but only just to get it started. Then, a leather work gloved hand to spin it the rest of the way, and out from behind -- open end first.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search