hey guys, i have a bit of a problem, i have two lug nuts stripped, and one of the studs. two questions 1. what is the proper measurements for the lug nuts (eg 12mm x 1.25), and is it possible to replace the stud without taking the car to a dealership?
thanks again
DO a search, there is a how to somewhere on the measurements and how to change it.
hey guys thanks, i tried all the steps in that explanation, but i have another problem now, when i got down to getting the torx bolts out i got the bolts out but the hub wouldn't budge i tried everything even wd-40 nadda any hints?
i'd cut the stud off if it wont come off....then push the old stud out. go to pep boys pick up new stud and lug nuts
MY 2003 SUNFIRE 15.33@88.5mph
"A N/A ecotec is not gonna give Honda's and Mitsu's that much of a run for their
money unless their blown or bottle fed.GM is still smokin crack!"
~1QWKZ24
www.streetracing.org, 08/2001
you might have to give the hub a hit with a hammer to break it loose. DONT BEAT THE CRAP OUT OF IT. sometimes rust gets in there and makes it hard to remove. there also be a o ring in there. be carefull not to damage.
