this is my first body kit on a vehicle....my car has eibach sportlines and the Buddy Club 2 kit....just wondering, how does everyone changer their oil with a bodykit on??? may be a dumb question but i see no way to get a jack under my car....
Well your jack points will still be there on your frame, if your jack hits your body kit before it hits the frame just cut a few blocks of wood and put them between the frame and the jack that will give yah the xrtra space to jack up.make sure you put jackstands dont trust a jack.
First dig a big hole then just drive over it and crawl in.
Take a couple 2x4's and nail them together and build a steped ramp that will get you up enough for your jack to go under it. Then as Tim said just place wood pieces on the jack to keep it from hitting the kit.
Semper Fi SAINT. May you rest in peace.
4 2X4 blocks about 10 inches each should be good, put em in front of your tires, then drive up on them. Instant +2 inches of clearence at all 4 corners.
Guys at autocross have been doing this for years.
-Chris
forklift in the driverside window .....kidding. Ya most tow truck driver bring wood block with them now for the chains so they don't break your skirts or use a flatbed grab some scrap wood from a new housing site and keep it close by incase of a oil change or a flat tire!
http://img86.imageshack.us/img86/4235/jim25ek.jpg
turn one of ur wheels all the way in so theres a gap between your wheel and fender/body kit slide the jack in there and you should be good to go
or use your spare tire jack for alil to geti t up then a regular jack
I used to use a set of ramps I had made from 2x10s nice wide target...
Knowledge about everything and yet an expert of nothing!!
Jack of all trades.
